-Abdi, A., Zarei, M., Mahdinazar, M., Akbarinia, F., (2020), “Economic Analysis Based on the Unit Weight of Hot Mix Asphalt”. Engineering Solid mechanics, Vol.9. No. 1. pp. 1-10.
-Abtahi, S. M., Sheikhzadeh, M., & Hejazi, S. M., (2010), “Fiber-reinforced asphalt-concrete–a review”. Construction and Building Materials, Vol. 24. No. 6.
pp. 871-877.
-Al-Hdabi, A. (2016). “Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler”. Construction and Building Materials. Vol. 126. pp. 544-551.
-Ameli, A., Babagoli, R., Norouzi, N., Jalali, F., & Mamaghani, F. P. (2020). “Laboratory evaluation of the effect of coal waste ash (CWA) and rice husk ash (RHA) on performance of asphalt mastics and Stone matrix asphalt (SMA) mixture”. Construction and Building Materials, Vol. 23. No. 7. pp. 117557.
-Arabani, M., & Tahami, S. A. (2017). “Assessment of mechanical properties of rice husk ash modified asphalt mixture”. Construction and Building Materials Vol. 149. pp. 350-358.
-Hamedi, G. H., & Tahami, S. A. (2018). “The effect of using anti-stripping additives on moisture damage of hot mix asphalt”. International Journal of Adhesion and Adhesives, Vol. 81. pp. 90-97.
-Han, J. H., Guo, J. J., & Liu, Z., (2012), “Experimental Investigation on Performance of Fiber Asphalt Mixture”. In Advanced Materials Research. Vol. 374,
pp. 1396-1399.
-Jaya, R. P., Hainin, M. R., Hassan, N. A., Yaacob, H., Satar, M. K. I. M., Warid, M. N. M., ... & Ramli, N. I. (2018), “Marshall Stability properties of asphalt mixture incorporating black rice husk ash”. Materials Today: Proceedings. Vol. 5. No. 10.
pp. 22056-22062.
-Khodaii, A. and Mehrara, A., (2009), “Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test”. Construction and Building Materials, Vol. 23. No. 7. pp. 2586-2592.
-Korayem, A. H., Ziari, H., Hajiloo, M., Abarghooie, M., & Karimi, P., (2020), “Laboratory evaluation of stone mastic asphalt containing amorphous carbon powder as filler material”. Construction and Building Materials, Vol. 243.
pp. 118280.
- Kumar, P., Mehndiratta, H. C., & Immadi, S. (2009), “Investigation of fiber-modified bituminous mixes”. Transportation research record, Vol. 2126. No. 1.
pp. 91-99.
-Miljković, M. and Radenberg, M. (2011), “Rutting mechanisms and advanced laboratory testing of asphalt mixtures resistance against permanent deformation”. Facta universitatis-series: Architecture and Civil Engineering, Vol. 9. No. 3.
pp. 407-417.
-National Cooperative Highway Research Program, (2004), “Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures”, NCHRP, Appendix RR: Finite Element Procedures for Flexible Pavement Analysis.
-Sargın, Ş., Saltan, M., Morova, N., Serin, S., & Terzi, S., (2013), “Evaluation of rice husk ash as filler in hot mix asphalt concrete”. Construction and Building Materials. Vol. 48. pp. 390-397.
-Schmiedlin, R. B., (1998),“Stone matrix asphalt: The Wisconsin experience”. Transportation research record, Vol. 1616. No. 1. pp. 34-41.
-Sengul, C. E., Oruc, S., Iskender, E., & Aksoy, A., (2013), "Evaluation of SBS modified stone mastic asphalt pavement performance". Construction and Building Materials, Vol. 41. pp. 777-783.
-Shafabakhsh, G. H., & Ani, O. J., (2015), “Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates”. Construction and Building Materials. Vol. 98. pp. 692-702.
-Tahami, S. A., Arabani, M., & Mirhosseini, A. F., (2018), “Usage of two biomass ashes as filler in hot mix asphalt”. Construction and Building Materials. Vol. 170.
pp. 547-556.
-Vamegh, M., Ameri, M., & Naeni, S. F. C., (2020), “Experimental investigation of effect of PP/SBR polymer blends on the moisture resistance and rutting performance of asphalt mixtures”. Construction and Building Materials, Vol. 253. pp., 119197.
-Xu, W., & Wang, X. C., (2011), “Study on performance for fiber asphalt mixture resistance to water damage”. In Advanced Materials Research. Vol. 204,
pp. 1789-1792.
-Zahedi, M., Barati, M., & Zarei, M. (2017). “Evaluation the effect of carbon nanotube on the rheological and mechanical properties of bitumen and Hot Mix Asphalt (HMA)”. Electron. J. Struct. Eng, Vol.17. No. 1.
pp. 76-84.
-Zahedi, M., Zarei, M., Manesh, H. A., Kalam, A. S., & Ghadiri, M. (2017b), “Technical-Economic Studies about Polyester Fibers with High Strength on Asphalt Mixtures with Solid Granulation”. Journal of Civil Engineering and Urbanism, Vol. 2. No. 2. pp. 1-11.
-Zahedi, M., Zarei, A., Zarei, M., & Janmohammadi, O., (2020), “Experimental determination of the optimum percentage of asphalt mixtures reinforced with Lignin”. SN Applied Sciences. Vol. 2. No. 2. pp. 258.
-Zarei, M., Mirbaha, B., Akbarinia, F., Rahmani, Z., Zahedi, M. & Zarei, A. (2020), “Application of concordance analysis method, (CA) for optimal selection of asphalt mixtures reinforced with rubber powder and carbon fiber”. Electron. J. Struct. Eng, Vol. 20. No. 1. pp. 53-62.
-Zarei, M., Rahmani, Z., Zahedi, M., & Nasrollahi, M., (2020b), “Technical, Economic, and Environmental Investigation of the Effects of Rubber Powder Additive on Asphalt Mixtures”. Journal of Transportation Engineering, Part B: Pavements, Vol. 146. No. 1. 04019039.
-Zarei, A., Zarei, M., & Janmohammadi, O., (2019), “Evaluation of the effect of lignin and glass fiber on the technical properties of asphalt mixtures”. Arabian journal for Science and engineering, Vol. 44. No. 5.
pp. 4085-4094.