یوسف دوست، س.، (1386)، "بررسی آزمایشگاهی مدول برجهندگی و مقاومت کششی غیر مستقیم آسفالت کف قیری"، پایاننامه کارشناسی ارشد. دانشکده مهندسی عمران، پردیس دانشکده های فنی، دانشگاه تهران.
-"مشخصات فنی اجرائی بازیافت سرد آسفالت" (1386)، نشریه 339، سازمان مدیریت و برنامه ریزی کشور.
- An Overview of Recycling and Reclamation Methods for Asphalt Pavement Rehabilitation, Asphalt Recycling and Reclaiming Association, Annapolis, MD, )1992(.
- Bissada, A.F. (1987), “Structural Response of Foamed-Asphalt-Sand Mixtures in Hot Environments”. In Transportation Research Record 1115, TRB, National Research Council, Washington, D.C., pp. 134-149.
- Bowering, R.H.(1970), “Properties and Behaviour of Foamed Bitumen Mixtures for Road Building”. 5th ARRB Conference, Part 6, pp. 38-57.
- Castedo, L.H. and Wood, L.E.(1983), “Stabilization with Foamed Asphalt of Aggregates Commonly Used in Low-Volume Roads”. In Transportation Research Record 898, TRB, National Research Council, Washington, D.C.
pp. 297-302.
- Csanyi, L.H.(1957). “Foamed Asphalt in Bituminous Pavements”, Transportation Research Record 160, TRB, National Research Council, Washington, D.C., pp. 109-122.
- Chiu, Chui-Te, and Huang, M. Y., (2002). “A study on properties of foamed asphalt treated mixes” Proc., 82nd Annual Transportation Research Board Meeting (CD-Rom), Transportation Research Council, Washington, D.C.
-Chandra, R., Veeraragavan, A., & Krishnan, J. M. (2013). “Evaluation of Mix Design Methods for Reclaimed Asphalt Pavement Mixes with Foamed Bitumen”. Procedia-Social and Behavioral Sciences, 104, pp. 2-11.
-Design, P. (1992). “A Guide to the Structural Design of Road Pavements”. Austroads Publication No. APGP17/04. Austroads, Sydney.
-Du, S. (2014). “Interaction mechanism of cement and asphalt emulsion in asphalt emulsion mixtures”. Materials and structures, 47(7), pp. 1149-1159.
-García, A., Lura, P., Partl, M. N., & Jerjen, I. (2013), “Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance”. Materials and structures, 46(8), pp: 1275-1289.
- “Guidelines for Cold In-Place Recycling Asphalt Recycling and Reclaiming Association”, Annapolis, MD, (1992).
- He, G. P., & Wong, W. G. (2007), “Laboratory study on permanent deformation of foamed asphalt mix incorporating reclaimed asphalt pavement materials”. Construction and Building Materials, 21(8), pp. 1809-1819.
- He, G. P., & Wong, W. G. (2008), “Effects of moisture on strength and permanent deformation of foamed asphalt mix incorporating RAP materials. Construction and Building Materials”, 22(1), pp. 30-40.
-Iwański, M., & Chomicz-Kowalska, A. (2013). “Laboratory study on mechanical parameters of foamed bitumen mixtures in the cold recycling technology”. Procedia Engineering, 57,
pp. 433-442.
-Iwański, M., Chomicz-Kowalska, A., (2012). “Experimental study of water and Frost resistance of foamed bitumen mixes in the cold recycling technology”, 5th Eurasphalt & Eurobitume Congress, 13-15th, Istanbul, Turkey.
-Iwański, M., & Chomicz-Kowalska, A. (2011),
“the effects of using foamed bitumen and bitumen emulsion in the cold recycling technology”. In 8th International Conference, Environmental Engineering.
- Kandhal P.S. (1984), “Asphalt Cold Recycling Technology in Pennsylvania, AAPT Proceedings”, Vol. 53, Association of Asphalt Paving Technologists, Minneapolis, MN.
- Kavussi, A., & Modarres, A. (2010), “Laboratory fatigue models for recycled mixes with bitumen emulsion and cement”. Construction and Building Materials, 24(10), pp. 1920-1927.
-Kavussi, A., & Modarres, A. (2010), “a model for resilient modulus determination of recycled mixes with bitumen emulsion and cement from ITS testing results”. Construction and Building Materials, 24(11), pp. 2252-2259.
- Kendal M., Baker B., Evans P & Rammujan J., (1999), “Foamed Bitumen Stabilization”, Southern Region Symposium, Australia.
-Khosravifar, S., Schwartz, C. W., & Goulias, D. G. (2013), “Foamed asphalt stabilized base: a case study”. In Proceeding of ASCE airfield and highway pavements conference. pp. 106-117.
-Kim, Y., & Lee, H. D. (2012), “Performance evaluation of cold in-place recycling mixtures using emulsified asphalt based on dynamic modulus”, flow number, flow time, and raveling loss. KSCE Journal of Civil Engineering, 16(4), pp. 586-593.
-Kim, Y., Im, S., & Lee, H. D. (2010), “Impacts of curing time and moisture content on engineering properties of cold in-place recycling mixtures using foamed or emulsified asphalt”. Journal of Materials in Civil Engineering, 23(5), pp. 542-553.
- Kim, Y., Lee, H. D., & Heitzman, M. (2009), Dynamic modulus and repeated load tests of cold in-place recycling mixtures using foamed asphalt. Journal of Materials in Civil Engineering, 21(6), pp. 279-285.
-Kim, Y., & Lee, H. D. (2011), Influence of reclaimed asphalt pavement temperature on mix design process of cold in-place recycling using foamed asphalt. Journal of Materials in Civil Engineering, 23(7), pp. 961-968.
-Kuna, K., Airey, G., & Thom, N. (2016), “Development of a tool to assess in-situ curing of Foamed Bitumen Mixtures”. Construction and Building Materials, 124, 55-68.
Kuna, K., Airey, G., & Thom, N. (2016), “Mix design considerations of foamed bitumen mixtures with reclaimed asphalt pavement material”. International Journal of Pavement Engineering, pp.1-14.
- Lee, D.Y.(1981), “Treating Marginal Aggregates and Soil with Foamed Asphalt”. Association of Asphalt Paving Technologists, Vol. 50,
pp. 211 - 250.
-Leek, C., & Jameson, G. (2011). “Review of Foamed Bitumen Stabilization Mix Design Methods”. Technical Report, Austroads
AP-T178/11, Sydney, Australia.
-Long, F. M., Theyse, H. L., & Ventura, D. F. C. (2004), “Characterisation of Foamed Bitumen Treated Material from HVS Test Section”. Transportek, CSIR, South Africa.
- Maccarrone, S., Holleran, G. and Leonard, D.J. and Hey, S. (1994), “Pavement Recycling Using Foamed Bitumen”. 17 the ARRB Conference, Part 3, pp. 349 - 366.
- Manual, W. C. R. (2004), Wirtgen GmbH. Windhagen, Germany.
-Modarres, A., Nejad, F. M., Kavussi, A., Hassani, A., & Shabanzadeh, E. (2011), “a parametric study on the laboratory fatigue characteristics of recycled mixes”. Construction and Building Materials, 25(4), pp. 2085-2093.
- MunthenK.M., (1999), “Foamed Asphalt Mixes – Mix Design Procedure”. Contract Report CR-98/077, CSIR Transportek, South Africa.
-Nazemi, M., & Heidaripanah, A. (2016), “Support vector machine to predict the indirect tensile strength of foamed bitumen-stabilized base course materials”. Road Materials and Pavement Design, 17(3), pp.768-778.
-Rutherford, T., Wang, Z., Shu, X., Huang, B., & Clarke, D. (2014), “Laboratory investigation into mechanical properties of cement emulsified asphalt mortar”. Construction and Building Materials, 65, pp. 76-83.
- Sakr, H.A. and Manke, P.G.(1985), “Innovations in Oklahoma Foamix Design Procedures” Transportation Research Record 1034, TRB, National Research Council, Washington, D.C.,
pp. 26-34.
-Yan, J., Zhang, Z., Charmot, S., Ding, W., & Li, F. (2014), “Investigation and Prediction Model for the Dynamic Modulus of Asphalt Emulsion Cold Recycled Mixtures”. Journal of Materials in Civil Engineering, 27(1).
- Yan, J., Ni, F., Yang, M., & Li, J. (2010). "An experimental study on fatigue properties of emulsion and foam cold recycled mixes". Construction and Building Materials, 24(11),
pp. 2151-2156.
- Wood, L. E., White, T. D., & Nelson, T. B. (1988), "Current practice of cold in-place recycling of asphalt pavements. Transportation Research Record", (1178).
-Wirtgen Group, (2002), “Rehabilitation of a Heavily Trafficked Road, Pavement Investigation and Construction Report”, Germany.