@article { author = {Taherkhani, H and SHafieimatak, M}, title = {Comparison of the Properties of Asphalt Cements Modified by Nanoclay and SBS}, journal = {Journal of Transportation Research}, volume = {13}, number = {2}, pages = {57-70}, year = {2016}, publisher = {}, issn = {1735-3459}, eissn = {2008-3351}, doi = {}, abstract = {The weaknesses of the traditional asphalt cements produced by the refineries are the main factors in premature failure of asphalt pavements. One of the measures to prevent these failures is the modification of the asphalt using additives. A variety of materials have been used for modification, among which are polymers and nano materials, including nanoclays. As the effects of these two types have not been compared in the literature, this paper describes the results of an experimental work, in which the effects of a type of nanoclay and Styrene-Butadene-Styrene, SBS, on the properties of 60/70 penetration grade asphalt cement have been investigated. Different amounts of each additive have been added to the asphalt, and the properties of penetration grade, softening point, penetration index, dynamic viscosity, and the rheological properties including phase angle and complex dynamic modulus have been studied. The results show that, both the additives have a stiffening effect on the asphalt, which increase the strength against permanent deformation. However, the stiffening effect is dependent on the type of additive and the amount of them used for modification. The SBS polymer has a better effect for improving the resistance against permanent deformation.      }, keywords = {asphalt cement,Nanoclay,SBS,phase angle,dynamic complex modulus}, title_fa = {مقایسه خصوصیات قیرهای اصلاح شده با نانورس و پلیمر SBS}, abstract_fa = {نواقص مربوط به قیرهای خالص تولید شده توسط پالایشگاه­ها منجر به بروز خرابی‌های زودرس در روسازی‌های آسفالتی می‌گردد. یکی ازروش­های جلوگیری ازآن اصلاح قیرها با مواد افزودنی است. از مواد افزودنی متنوعی در اصلاح رفتار قیر استفاده گردیده است، که ازجمله آنها انواع پلیمرها و اخیرا از مواد نانو، شامل نانو رس می‌باشند. با توجه به این‌ که اثر این دونوع مواد در تحقیقات انجام گرفته با هم مقایسه نشده­اند، در تحقیقی که نتایج آن در این مقاله ارایه می‌گردد، اثر دو نوع ماده افزودنی شامل یک نوع نانورس و پلیمر استایرن-بوتادین-استایرن SBS بر روی خواص یک نوع قیر خالص 70/60 مورد مطالعه قرار گرفته و با هم مقایسه گردیده است. درصدهای وزنی مختلف از این مواد به قیر اضافه شده و درجه نفوذ، نقطه نرمی، شاخص نفوذ، ویسکوزیته دینامیکی، و زاویه فاز و مدول دینامیکی مختلط قیر در دماهای مختلف مورد مطالعه قرار گرفته­اند. نتایج نشان­دهنده این است که افزایش این مواد باعث کاهش درجه نفوذ، افزایش نقطه نرمی، شاخص نفوذ و ویسکوزیته، کاهش زاویه فاز و افزایش مدول دینامیکی می‌شود. اما، این تأثیر به نوع ماده افزودنی و مقدار آن بستگی دارد. پلیمر SBS مقاومت در مقابل تغییر شکل را بیشتر از نانو رس افزایش می‌دهد که به دلیل تأثیر بیشتر آن در سخت­کنندگی و ارایه خاصیت ارتجاعی به قیر است.    }, keywords_fa = {قیر خالص,نانو رس,SBS,زاویه فاز,مدول دینامیکی مختلط}, url = {https://www.trijournal.ir/article_48159.html}, eprint = {https://www.trijournal.ir/article_48159_7161e0c33aee881be15ba89a8c30057f.pdf} }