@article { author = {Sahebzamani, Hamidreza and Mahmoodi Nia, Nader and Pajoohan, Saba and Mahmoodi Nia, Masoud}, title = {Evaluating penetration of prime coats Produced with Kerosene and Bio-solvent}, journal = {Journal of Transportation Research}, volume = {}, number = {}, pages = {-}, year = {2019}, publisher = {}, issn = {1735-3459}, eissn = {2008-3351}, doi = {}, abstract = {The prime coat is used to create a layer of bitumen to seal the base of roadways, protecting under-layers from water intrusion, binding the surface material, enhancing adhesion between unbound and asphalt layers, and preventing slippage between them. The presence of the solvent improves penetration of prime coat material through facilitating the capillary action. Because of environmental aspects, in this study, the cationic emulsion is produced with two different solvents, namely Kerosene and bio-solvent, with three different quantities, 0, 7, and 12 percent by emulsion. Penetration of produced emulsions in compacted base samples was evaluated in dry and wet condition. The results showed that the amount of solvent had a remarkable influence in the penetration of the bitumen emulsions and the solvent-containing emulsions had better penetration than emulsion without solvent. Also, the type of aggregate materials and their moisture content had a significant effect on the emulsion penetration, so that the penetration of emulsion in wet calcareous aggregates was more than dry calcareous and wet and dry siliceous aggregates.}, keywords = {Prime coat,Bitumen Emulsion,penetration,Bio-solvent}, title_fa = {ارزیابی نفوذپذیری امولسیون‎های اندود‎ نفوذی تهیه شده با حلال‎های نفتی و بیولوژیکی}, abstract_fa = {اندود نفوذی برای ایجاد یک لایه قیری جهت آب بند کردن اساس راه، جلوگیری از نفوذ آب به لایه‎های زیرین، افزایش پایداری لایه‎های خاکی و کاهش جدا شدن مصالح ریزدانه از سطح لایه اساس توسط باد و باران اجرا می‎شود. همچنین چسبندگی رویه آسفالتی به لایه اساس را افزایش داده و از لغزش آن بر روی اساس جلوگیری می‎کند. وجود حلال در امولسیون‎ها با تسهیل حرکت امولسیون در خلل و فرج لایه اساس باعث نفوذ بیشتر اندود نفوذی می‎گردد. در این مقاله با توجه به اهمیت زیاد مسائل زیست محیطی، امولسیون کاتیونی با استفاده از حلال‏های نفتی و بیولوژیکی با سه مقدار متفاوت صفر، 7 و 12 درصد تولید شده و میزان نفوذپذیری امولسیون‌ها در نمونه‌های اساس متراکم در دو حالت خشک و مرطوب اندازه‎گیری گردید. نتایج نشان دادند مقدار حلال در میزان نفوذ امولسیون‌های قیری بسیار مؤثر است و امولسیون‌های حاوی حلال، نفوذ بهتری نسبت به امولسیون بدون حلال داشتند. همچنین نوع مصالح سنگی و درصد رطوبت آن اثر قابل توجهی بر نفوذ امولسیون دارد به گونه‌ای که نفوذپذیری در مصالح کوهی آهکی مرطوب نسبت به مصالح کوهی خشک و مصالح رودخانه‌ای سیلیسی، در هر دو حالت خشک و مرطوب، بسیار مطلوب و قابل توجه بود.}, keywords_fa = {اندود نفوذی,قیر امولسیونی,نفوذپذیری,حلال بیولوژیکی}, url = {https://www.trijournal.ir/article_81634.html}, eprint = {} }