بررسی نتایج آزمایش خمش 4 نقطه‌ای تیرچه‌های مخلوط بتن غلتکی (RCC)حاوی خرده لاستیک و خرده آسفالت بازیافتی

نوع مقاله : مقاله پژوهشی

نویسندگان

1 گروه مهندسی عمران، واحد قزوین، دانشگاه آزاد اسلامی، قزوین، ایران

2 گروه مدیریت ساخت، دانشکده مهندسی کاربردی، فناوری و ایمنی، دانشگاه میلرزویل، میلرزویل، پنسیلوانیا، ایالات متحده آمریکا

چکیده

 ترک­خوردگی ناشی از تنش کششی یکی از اساسی­ترین نوع خرابی در روسازی­های بتنی بشمار می­آید. در این مقاله اثر خصوصیات بتن غلتکی حاوی خرده لاستیک بازیافتی و خرده آسفالت بر روی رفتار شکست نمونه­ها در مودهای مختلف1 شکست مورد بررسی قرار گرفته است. مجموعه­ای شامل 288 نمونه تیرچه بتن غلتکی حاوی2 RAP یا خرده لاستیک تحت آزمایش خمش چهارنقطه­ای­(4PB)  قرار گرفتند. تاثیر دانه­بندی و درصد خرده لاستیک یا خرده آسفالت بازیافتی و سیمان بر ضریب شدت تنش نمونه­ها در مودهای Iو II مورد بررسی قرار گرفته است. نتایج ضریب شدت تنش نمونه­ها بیانگر این بود که ترکیب مخلوط بتن غلتکی تاثیر بسزایی بر رفتار شکست آن خواهد داشت. همچنین اگرچه، ترکیب مصالح بازیافتی باعث افزایش انعطاف پذیری و چقرمگی نمونه­ها می­گردد ولیکن اثر معکوسی در میزان ضریب شدت تنش شکست نمونه­ها و میزان تاب باربری آنها خواهد داشت.

کلیدواژه‌ها


عنوان مقاله [English]

The 4-Point Bending Test Results Analysis of Notched Roller Compacted Concrete (RCC) Mixture Beams Containing Reclaimed Asphalt Pavement and Crumb Rubber

نویسندگان [English]

  • A.R. Ameli 1
  • E. Parvaresh Karan 2
  • S.A.H. Hashemi 1
1 Department of Civil Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
2 Department of Applied Engineering, Safety, and Technology, Millersville University, Osburn Hall,
چکیده [English]

Tensile cracking is one of the main modes of deterioration and failure in rigid pavements. Hence, in this paper the effects of roller compacted concrete (RCC) characteristics on their fracture behavior in both pure mode I and II are experimentally investigated. A set of 288 edge cracked beam specimens endured the four-point bending (4PB) test and were tested for different concrete mixtures made with waste materials such as reclaimed asphalt pavement (RAP) and crumb rubber. The influence of aggregate gradation, cement content, RAP, and rubber content on the critical stress intensity factors in pure fracture mode I and II were studied. The fracture toughness results showed that concrete mix specifications had a noticeable influence on the cracking initiation of RCC and the effect of substituting of waste materials with natural aggregates was found to be negative, but their behavior was still comparable to those obtained for control mixes.

کلیدواژه‌ها [English]

  • RCC
  • Stress Intensity Factor
  • Reclaimed Asphalt Pavement
  • Recycle Crumb Rubber
-آنون (1397)، "نشریه شماره 731"، دستورالعمل طراحی، اجراو نگهداری روسازی بتنی راه ها.
 
-صادق، ا.، (1386)، "مطالعه رفتار مکانیکی بتن غلتکی با مصالح ریزدانه غیرخمیری برای کاربرد در روسازی­های بتنی".
 
-محمد­کریمی گوغری، ا.ح.، امین احمدی حمزه عرب عامری، (1391)، "امکان سنجی آزمایشگاهی استفاده از خرده آسفالت بازیافتی به عنوان جایگزین سنگدانه در مخلوط بتن غلتکی روسازی"، مهندسی حمل و نقل مجله، شماره اول (سال سوم).
 
-Akbardoost, J. & Ayatollahi, M., (2014), "Experimental analysis of mixed mode crack propagation in brittle rocks: The effect of non-singular terms". Engineering Fracture Mechanics, 129, pp.77-89.
 
-Aliha, M., (2014), "Indirect tensile test assessments for rock materials using 3-d disc-type specimens". Arabian Journal of Geosciences, 7 (11), pp.4757-4766.
 
-Aliha, M., Ashtari, R. & Ayatollahi, M.R., (2014), "Mode i and mode ii fracture toughness testing for a coarse grain marbleed eds". Applied Mechanics and MaterialsTrans Tech Publ, pp.181-188.
 
-Aliha, M. & Ayatollahi, M., (2009), "Brittle fracture evaluation of a fine grain cement mortar in combined tensile‐shear deformation". Fatigue & Fracture of Engineering Materials & Structures, 32 (12), pp.987-994.
 
-Aliha, M. & Ayatollahi, M., (2011), "Geometry effects on fracture behaviour of polymethyl methacrylate". Materials Science and Engineering: A, 527 (3), pp.526-530.
 
-Aliha, M. & Ayatollahi, M., (2011), "Mixed mode i/ii brittle fracture evaluation of marble using scb specimen". Procedia Engineering, pp.311-318.
 
-Aliha, M., Ayatollahi, M. & Kharazi, B., (2009), "Mode ii brittle fracture assessment using asfpb specimen". International journal of fracture, 159 (2), pp.241-246.
 
-Aliha, M., Ayatollahi, M., Smith, D. & Pavier, M., (2010), "Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading". Engineering Fracture Mechanics, 77 (11), pp.2200-2212.
 
-Aliha, M., Hosseinpour, G.R. & Ayatollahi, M., (2013), "Application of cracked triangular specimen subjected to three-point bending for investigating fracture behavior of rock materials". Rock mechanics and rock engineering, 46 (5), pp.1023-1034.
 
-Aliha, M., Sistaninia, M., Smith, D., Pavier, M. & Ayatollahi, M., (2012), "Geometry effects and statistical analysis of mode i fracture in guiting limestone". International Journal of Rock Mechanics and Mining Sciences, 51, pp.128-135.
 
-Artamendi, I. & Khalid, H.A., (2006), "A comparison between beam and semi-circular bending fracture tests for asphalt". Road Materials and Pavement Design, 7 (sup1), pp.163-180.
 
-Association, P.C., (1987), "Structural design of roller-compacted concrete for industrial pavements: Portland Cement Association".
 
-Ataei, H., (2013), "Sustainability and effect of rubber tire aggregates on compressive and dynamic strength of concrete used for highway and airfield pavemented eds". Airfield and Highway Pavement 2013: Sustainable and Efficient PavementsASCE, pp.64-75.
 
-Ayatollahi, M. & Aliha, M., (2007),
"­Fracture toughness study for a brittle rock subjected to mixed mode i/ii loading". International Journal of Rock Mechanics and Mining Sciences, 44 (4), pp.617-624.
 
-Ayatollahi, M., Aliha, M. & Saghafi, H., 2011. An improved semi-circular bend specimen for investigating mixed mode brittle fracture. Engineering Fracture Mechanics, 78 (1), 110-123.
 
-Bažant, Z. & Pfeiffer, P., 1986. Shear fracture tests of concrete. Materials and Structures, 19 (2), 111-121.
 
-Berry, M., Stephens, J., Bermel, B., Hagel, A. & Schroeder, D., 2013. Feasibility of reclaimed asphalt pavement as aggregate in portland cement concrete.
 
-Braham, A., Buttlar, W. & Ni, F., 2010. Laboratory mixed-mode cracking of asphalt concrete using the single-edge notch beam. Road Materials and Pavement Design, 11 (4), 947-968.
 
-Chong, K. & Kuruppu, M., 1984. New specimen for fracture toughness determination for rock and other materials. International Journal of Fracture, 26 (2), R59-R62.
 
-Committee, A., 2001. Comittee 325. 10 r-95. Report on Roller-Compacted Concrete Pavements.
Courard, L., Michel, F. & Delhez, P., 2010. Use of concrete road recycled aggregates for roller compacted concrete. Construction and Building Materials, 24 (3), 390-395.
 
-De Bondt, A.H., (1992), "Cracking of asphalt concrete overlays". RRRL Report,
 7-92-203-8.
 
-Dodoo-Arhin, D., Mensah, S.A., Yaya, A. & Agyei-Tuffour, B., (2015), "Application of discarded rubber car tyres as synthetic coarse aggregates in light weight pavement concretes. American Journal of Materials Science, 5 (4), pp.75-83.
 
-Erdogan, F. & Sih, G., (1963), "On the crack extension in plates under plane loading and transverse shear". Journal of basic engineering, 85 (4), pp.519-525.
 
-Fakhri, M., (2016), "The effect of waste rubber particles and silica fume on the mechanical properties of roller compacted concrete pavement". Journal of Cleaner Production, 129, pp.521-530.
 
-Gdoutos, E., (2005), "Fracture mechanics: An introduction, 2nd edn., Vol. 123 of solid mechanics and its applications. Springer, Dordrecht.
 
-Golewski, G., Golewski, P. & Sadowski, T., (2012),"­Numerical modelling crack propagation under mode ii fracture in plain concretes containing siliceous fly-ash additive using xfem method". Computational Materials Science, 62, pp.75-78.
 
-Graeff, A.G., Pilakoutas, K., Neocleous, K. & Peres, M.V.N., (2012), "Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres". Engineering Structures, 45, pp.385-395.
 
-Güneyisi, E., Gesoğlu, M. & Özturan, T., (2004), "Properties of rubberized concretes containing silica fume." Cement and Concrete Research, 34 (12), pp.2309-2317.
 
-Hassan, K., Brooks, J. & Erdman, M., (2000), "The use of reclaimed asphalt pavement (rap) aggregates in concrete". Waste Management Series, 1, pp.121-128.
 
-Highsmith Jr, S., (2009), "Crack path determination for non-proportional mixed-mode fatigue: ProQuest".
 
-Huang, B., Shu, X. & Li, G., (2005), "Laboratory investigation of portland cement concrete containing recycled asphalt pavements". Cement and Concrete Research, 35 (10), pp.2008-2013.
 
-Jacobs, M.M.J., (1995), "Crack growth in asphaltic mixes". TU Delft, Delft University of Technology.
 
-Kaloush, K., Way, G. & Zhu, H., (2005), "Properties of crumb rubber concrete". Transportation Research Record: Journal of the Transportation Research Board, (1914), pp.8-14.
 
Kuruppu, M.D. & Chong, K.P., (2012), "Fracture toughness testing of brittle materials using semi-circular bend (scb) specimen. Engineering Fracture Mechanics, 91, pp.133-150.
 
-Lim, I., Johnston, I. & Choi, S., (1993), "Stress intensity factors for semi-circular specimens under three-point bending". Engineering Fracture Mechanics, 44 (3), pp.363-382.
 
-Lin, Y., Karadelis, J.N. & Xu, Y., (2013), "A new mix design method for steel fibre-reinforced, roller compacted and polymer modified bonded concrete overlays". Construction and Building Materials, 48, pp.331-341.
 
-Maccagno, T. & Knott, J., (1989), "The fracture behaviour of pmma in mixed modes i and ii. Engineering Fracture Mechanics", 34 (1), pp.65-86.
 
-Madhkhan, M., Azizkhani, R. & Harchegani, M.T., (2012), "Effects of pozzolans together with steel and polypropylene fibers on mechanical properties of rcc pavements". Construction and Building Materials, 26 (1), pp.102-112.
 
-Meddah, A., Beddar, M. & Bali, A., (2014), Use of shredded rubber tire aggregates for roller compacted concrete pavement. Journal of Cleaner Production, 72, pp.187-192.
 
Modarres, A. & Hosseini, Z., (2014), "Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material. Materials & Design, 64,
pp.227-236.
 
-Mohammadi, I., Khabbaz, H. & Vessalas, K, (2014), "In-depth assessment of crumb rubber concrete (crc) prepared by water-soaking treatment method for rigid pavements". Construction and Building Materials, 71, pp.456-471.
 
Mueller, P., (1990), "Roller compacted concrete pavement". State of the art, Final report.
 
-Nuñez, J.Y.M., Leonel, E.D. & Faxina, A.L., (2016), "Fatigue characteristics of modified asphalt binders using fracture mechanics. Engineering Fracture Mechanics, 154", pp.1-11.
 
-Okafor, F.O., (2010), "Performance of recycled asphalt pavement as coarse aggregate in concrete". Leonardo Electronic Journal of Practices and Technologies, 17, pp.47-58.
 
-Oliveira, H.L. & Leonel, E.D., (2013), "Cohesive crack growth modelling based on an alternative nonlinear bem formulation". Engineering Fracture Mechanics, 111,
pp.86-97.
 
-Onuaguluchi, O. & Panesar, D.K., (2014), "Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume". Journal of Cleaner Production, 82, pp.125-131.
 
-Petersson, P.-E., (1981), "Crack growth and development of fracture zones in plain concrete and similar materials: Division, Inst.
Ribeiro, A.B. & De Almeida, I., 2000. Study on high performance roller compacted concrete. Materials and Structures, 33 (6), pp.398-402.
 
-Shahani, A. & Tabatabaei, S., (2008), "Computation of mixed mode stress intensity factors in a four-point bend specimen. Applied Mathematical Modelling, 32 (7), pp.1281-1288.
 
-Shalaby, A., Abd El Halim, A. & Easa, S., (2011), "Influence of thermal stresses on construction-induced cracksed.^eds. RILEM proceedingsChapman & Hall, pp.30-39.
 
-Sobhan, K. & Mashnad, M., (2001), "Roller-compacted fiber concrete pavement foundation with recycled aggregate and waste plastics. Transportation Research Record: Journal of the Transportation Research Board, (1775), pp.53-63.
 
-Soil, A.C.D.-O. & Rock, (2009), "Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3 (2,700 kn-m/m3)) 1: ASTM international"
 
-Suresh, S., Shih, C., Morrone, A. & O'dowd, N., (1990), Mixed‐mode fracture toughness of ceramic materials. Journal of the American Ceramic Society, 73 (5), pp.1257-1267.
 
-Turatsinze, A. & Garros, M., (2008), "On the modulus of elasticity and strain capacity of self-compacting concrete incorporating rubber aggregates". Resources, conservation and recycling, 52 (10), pp.1209-1215.
 
-Walck, C., (2007), "Handbook on statistical distributions for experimentalists".
 
-Williams, J. & Ewing, P., (1972), "Fracture under complex stress—the angled crack problem. International Journal of Fracture Mechanics, 8 (4), pp.441-446.
 
Zipf Jr, R.K. & Bieniawski, Z., (2012),  "Mixed mode testing for fracture toughness of coal based on critical-energy-densityed eds". The 27th US Symposium on Rock Mechanics (USRMS)American Rock Mechanics Association.