-اخوان بهابادی، م.ج.، خبیری، م.م. و فتوحی فیروزآبادی، ع. (1395)، "بررسی عددی رشد ترک بر پایه ضرایب شدت تنش در اثر بارگذاری چرخ هواپیما در روسازی آسفالتی فرودگاه"، مجله پژوهشنامه حمل ونقل، شماره 3، ص. 14-30.
-ABAQUS version 6.13, user's Guide, (2013).
-Baek, J. and Al-Qadi, I., (2011), "Sand Mix Interlayer to Control Reflective Cracking in Hot-Mix Asphalt Overlay", Journal of the Transportation Research Board, No. 2227,
pp. 53-60.
-Baek, J., Ozer, H., Wang, H. and Al-Qadi, I., (2010), "Effects of Interface Conditions on Reflective Cracking Development in Hot-Mix Asphalt Overlays", Road Materials and Pavement Design, Taylor & Francis, No. 2,
pp. 307-334.
-Belytschko, T. and Black, T., (1999), "Elastic crack growth in finite elements with minimal remeshing", Journal of Methods Engineering, No. 45(5), pp. 601-620.
-Dave, E. and Buttlar, W. G., (2010), "Thermal reflective cracking of asphalt concrete overlays", Journal of Pavement Engineering, Taylor & Francis, No. 6, pp. 477-488.
-Elseifi, M. and Al-Qadi, I., (2004), "A Simplified Overlay Design Model against Reflective Cracking Utilizing Service Life Prediction", Road Materials and Pavement Design, Taylor & Francis, No. 2, pp. 169-191.
-Flintsch, G. W., Diefenderfer, B. K. and Nunez, O., (2008), "Composite Pavement Systems: Synthesis of Design and Construction Practices", Virginia Department of Transportation & Federal Highway Administration, Charlottesville, Virginia.
-Garzon, J., Duarte, C. A. and Buttlar, W. G., (2010), "Analysis of Reflective Cracks in Airfield Pavements using a 3-D Generalized Finite Element Method", Road Materials and Pavement Design, Taylor & Francis, No. 2,
pp. 459-477.
-Garzon, J., Kim, D. J., Duarte, C. A. and Buttlar, W. G., (2013) "Two-Scale 3D Analysis of Reflective Cracks In Airfield Pavements", Journal of Computational Methods, No. 6, pp. 1-30.
-Ghauch, Z.G. and Abou-Jaoude, G. G., (2013), "Strain response of hot-mix asphalt overlays in jointed plain concrete pavements due to reflective cracking", Elsevier Ltd,
No. 124, pp. 38-46.
-Huang, Y. H., (2004), "Pavement analysis and design", 2nd Upper Saddle River: NJ Prentice Hall.
-Islam, M. R., Vallejo, M. J. and Tarefder, R.A., (2017), "Crack Propagation in Hot Mix Asphalt Overlay Using Extended Finite-Element Model", Journal of materials in civil engineering, ASCE, No. 29, pp. 1-13.
-Kim, H., Buttlar, W. G. and Chou, K. F., (2010), "Mesh-Independent Fracture Modeling for Overlay Pavement System under Heavy -Aircraft Gear Loadings", Journal of transportation engineering, ASCE, No. 136, pp. 370-378.
-Kim, H. and Buttlar, W. G., (2009) "Finite element cohesive fracture modeling of airport pavements at low temperatures", Cold Regions Science and Technology, Elsevier Ltd, No. 57, pp. 123-130.
-Kim, J. and Buttlar, W. G., (2002), "Finite element cohesive fracture modeling of airport pavements at low temperatures", Journal of transportation engineering, ASCE, No. 128, pp. 375-384.
-Liao, Y., (2007), "Viscoelastic FE modeling of asphalt pavements and its application to U.S", 30 perpetual pavements (doctoral dissertation). Ohio University, USA.
-Modarres, A. and Shabani, H., (2015), "Investigating the effect of aircraft impact loading on the longitudinal top-down crack propagation parameters in asphalt runway pavement using fracture mechanics", Elsevier Ltd, No. 150, pp. 28-46.
-Ogundipe, O. M., Thom, N. and Collop, A., (2014), "Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking", Springer, No. 22, pp. 104-111.
-Ogundipe, O. M., Thom, N. and Collop, A., (2012), "Investigation of crack resistance potential of stress absorbing membrane interlayers (SAMIs) under traffic loading", Elsevier Ltd, No. 38, pp. 658-666.
-Shen, S., Zhang, W., Wang, H. and Huang, H., (2017), "Numerical evaluation of surface-initiated cracking in flexible pavement overlays with field observations", Road Materials and Pavement Design, Taylor & Francis, No. 1, pp. 221-234.