AASHTO, (2007). Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. AASHTO Provisional Standards: Washington, DC, USA.
Amanda, M. T., Mauliana, R., Rahman, T., & Suparma, L. B. (2025). Evaluating the performance of porous asphalt mixtures with polymer-modified and unmodified bitumen. Discover Civil Engineering, 2(1), 31.
-AAPA, Open Graded Asphalt Design Guide, Ali, S. A., Zaman, M., Ghabchi, R., Rahman, M. A., Ghos, S., & Rani, S. (1997).Effect of additives and aging on moisture-induced damage potential of asphalt mixes using surface free energy and
laboratory-based performance tests. International Journal of Pavement Engineering, 23(2), 285-296.
-Alvarez, A. E., Diaz, E. J., Mejía, R. A., Arámbula-Mercado, E., & Reyes-Ortiz, O. J. (2023). Optimizing the dose of warm-mix asphalt additives by maximizing the asphalt-aggregate adhesion measured via surface-free energy. Journal of Materials in Civil Engineering, 35(2), 04022410.
-An, J., Song, Y., Wu, S., Xu, H., Yang, X., Gong, Z., & Hao, H. (2026). Investigation on the moisture resistance and mechanism of asphalt concrete using metallurgical solid waste as anti-stripping agent. Construction and Building Materials, 518, 145792.
-Arabani, M., Hamedi, G. H., Majd Rahimabadi, M., & Mazhari Pakenari, M. (2025). Effect of NMH and DA Additives and Bitumen Aging on Cohesion and Adhesion Failures Using Surface Free Energy and Pull-Off Methods. Journal of Materials in Civil Engineering, 37(4), 04025066.
-Asgharzadeh, S. M., Tabatabaee, N., Naderi, K., & Partl, M. N. (2015). Evaluation of rheological master curve models for bituminous binders. Materials and Structures, 48(1), 393-406.
-Bhasin, A., & Little, D. N. (2007). Characterization of aggregate surface energy using the universal sorption device. Journal of Materials in Civil Engineering, 19(8), 634-641.
-Caccavo, Diego, Marco Iannone, Isidoro Russo, Anna Maria Petrucci, Raffaele Petrucci, Gianluca Genovese, Ciro Caliendo, and Gaetano Lamberti. (2026). Evaluation of binder and mixture performance in crumb rubber asphalt modified with Sasobit. Construction and Building Materials 516 145674.
-Choudhary, D., Kaithwas, S., Sharma, R. K., Mishra, A., Singhai, S., Powar, S., & Singh,
A. (2024). Recycling of waste toner derived from exhausted printer cartridges as adsorbent for defluoridation of water. Environmental Technology & Innovation, 34, 103572.
-Daniel-Mkpume, C. C., Ahaiwe, R. C., Ifenatuorah, C. L., Ike-Eze, I. C. E., Aigbodion, V. S., Egoigwe, S. V., & Okonkwo, E. G. (2022). Potential end of life application of African star apple shell and waste toner powder as composite filler materials. Journal of Material Cycles and Waste Management, 24(2), 680-691.
-Dong, L., Huang, Z., Ruan, J., Zhu, J., Huang, J., Huang, M., & Zhang, T. (2017). Pyrolysis routine of organics and parameter optimization of vacuum gasification for recovering hazardous waste toner. ACS Sustainable Chemistry & Engineering, 5(11), 10038-10045.
-Du, X., Hu, K., Zhang, F., Liu, J., & Gillani, S. T. A. (2025). Characteristics of waste toner powder and its interaction effect on the physicochemical properties of asphalt binder. Construction and Building Materials, 458, 139484.
-Duan, S., Cui, J., Hu, J., Han, T., Chen, Y., Wang, H., & Ma, T. (2024). Research on the adhesion mechanism and compatibility of acrylate composite polyurethane binder− aggregate based on surface free energy theory. Construction and Building Materials, 438, 137236.
-Fernández, B., Ayala, J., Del Valle, E., Martínez-Blanco, D., Castañón, A. M., & Menéndez-Aguado, J. M. (2022). Recycling of waste toner powder as adsorbent to remove aqueous heavy metals. Materials, 15(12), 4150.
-Forti, V., Baldé, C. P., Kuehr, R., & Bel, G. (2020). The global e-waste monitor 2020. United Nations University (UNU), International Telecommunication Union (ITU) & International Solid Waste Association (ISWA), Bonn/Geneva/Rotterdam, 120, 14.
-Fujinaga, T., Miyasaka, T., Kanou, Y., & Akiba, S. (2025). Design and Evaluation of Modified Asphalt with Enhanced Stripping Resistance Based on Surface Free Energy. Construction Materials, 5(3), 64.
-Ghabchi, R., Singh, D., & Zaman, M. (2014). Evaluation of moisture susceptibility of asphalt mixes containing RAP and different types of aggregates and asphalt binders using the surface free energy method. Construction and Building Materials, 73, 479-489.
-Good, R. J. (1992). Contact angle, wetting, and adhesion: a critical review. Journal of adhesion Science and Technology, 6(12), 1269-1302.
-Habal, A., & Singh, D. (2022). Establishing threshold value of surface free energy and binder bond strength parameters for basaltic asphalt mixes. Road Materials and Pavement Design, 23(8), 1877-1899.
-Huang, J., Li, X., Kumar, G. S., Deng, Y., Gong, M., & Dong, N. (2021). Rheological properties of bituminous binder modified with recycled waste toner. Journal of Cleaner Production, 317, 128415.
-Hamedi, G. H., Sakanlou, F., Rahmani, H., Sohrabi, M., & Hofko, B. (2025). Effects of short-term aging of base and nano-modified bitumens on surface free energy and their relationship with moisture sensitivity in warm-mix asphalt. Scientific Reports, 16(1), 3641.
-Hossain, K., Karakas, A., & Hossain, Z. (2019). Effects of aging and rejuvenation on surface-free energy measurements and adhesion of asphalt mixtures. Journal of Materials in Civil Engineering, 31(7), 04019125.
-Huang, J., Kumar, G. S., & Sun, Y. (2021). Evaluation of workability and mechanical properties of asphalt binder and mixture modified with waste toner. Construction and Building Materials, 276, 122230.
-Huang, J., Zhang, J., & Gao, Y. (2021). Evaluating the clogging behavior of pervious concrete (PC) using the machine learning techniques. CMES-Computer Modeling in Engineering and Sciences, 130(2), 805-821.
-Ibeagia, U. M., Okereke, S. O. E., Okpareke, O. C., & Ukoha, P. O. (2012). Studies on The Modifications of Asphalt Binder Using Some Selected Polymers.
-Itoua, P. I., Sun, D., Li, P., & Shen, S. (2023). Influence of waste toner on asphalt binder: Chemical and rheological characterization. Molecules, 28(6), 2794.
-Itoua, P. I., & Sun, D. (2024). Evaluation of waste toner asphalt containing crude palm oil from Congo: Rheological properties, compatibility, self-healing and aging characteristic. Case Studies in Construction Materials, 20, e03082.
-Kandhal, P. S. (2002). Design, construction, and maintenance of open-graded asphalt friction courses. National Asphalt Pavement Association.
-Kanitpong, K. and Bahia, H. U. (2003). Role of adhesion and thin film tackiness of asphalt binders in moisture damage of HMA (with discussion). Journal of the Association of Asphalt Paving Technologists, Vol. 72.
Kataware, A. V., Shantharam, A., & Suryawanshi, S. (2025). Evaluation of moisture resistance of cold mix asphalt and binder using Tensile strength ratio and Surface Free energy approach. Journal of Adhesion Science and Technology, 39(22),
3375-3404.
-Khodaii, A., Haghshenas, H. F., Kazemi Tehrani, H., & Khedmati, M. (2013). Application of response surface methodology to evaluate stone matrix asphalt stripping potential. KSCE Journal of Civil Engineering, 17(1), 117-121.
Li, N., Wang, J., Si, W., & Hu, D. (2022). Quantitative analysis of adhesion characteristics between crumb rubber modified asphalt and aggregate using surface free energy theory. Materials, 15(16), 5735.
Liu, H., Zhang, Y., Hao, J., Chen, C., Ma, T., & Pei, Y. (2025). Study on the interfacial adhesion mechanism and microscopic characteristics between modified emulsified asphalt and refined processing RAP material based on surface free energy theory. Construction and Building Materials, 493, 143326.
-Lombardo, J. Asphalt Is Getting New Life from Recycled Printer Ink. 2015.
-Luo, Y., Guo, P., Cheng, S., Gao, J., Shi, C., Chen, Y., & Shang, Y. (2025). Gray correlation entropy and factor analysis between adhesion characteristics and micro characteristics of warm mix recycled asphalt. Journal of Cleaner Production, 526, 146620.
-Lu, J., Yang, W., Sun, D., Zhang, S., Li, C., Fu, C., & Kou, J. (2026). Laboratory investigation of anti-stripping agents for improving the interfacial interaction between PE wax modified asphalt binder and aggregate. Construction and Building Materials, 519, 145907.
-Mo, L., Huurman, M., Wu, S., Molenaar, A.A.A. (2009). Raveling investigation of porous asphalt concrete based on fatigue characteristics of
bitumen–stone adhesion and mortar. Mater. Des. 30,
170–179.
Notani, M. A., Moghadas Nejad, F., Fini, E. H., & Hajikarimi, P. (2019). Low-temperature performance of toner-modified asphalt binder. Journal of Transportation Engineering, Part B: Pavements, 145(3), 04019022.
-Notani, M. A., Moghadas Nejad, F., Khodaii, A., & Hajikarimi, P. (2019). Evaluating fatigue resistance of toner-modified asphalt binders using the linear amplitude sweep test. Road Materials and Pavement Design, 20(8), 1927-1940.
-Notani, M. A., Hajikarimi, P., Nejad, F. M., & Khodaii, A. (2020). Rutting resistance of toner-modified asphalt binder and mixture. International Journal of Pavement Research and Technology, 13(1), 1-9.
-Rahman, M. A., Ghabchi, R., Zaman, M., & Ali, S. A. (2021). Rutting and moisture-induced damage potential of foamed warm mix asphalt (WMA) containing RAP. Innovative Infrastructure Solutions, 6(3), 158.
-Rambarran, S., Clark, A., Mohammed, S., Sangster, N., & Maharaj, R. (2026). Rutting and fatigue cracking characteristics of toner-modified asphaltic blends. Journal of Smart Science and Technology, 6(1), 37-47.
-Ren, J. L., Xu, Y. S., Huang, J. D., Wang, Y., Jia, Z. R. (2021). Gradation optimization and strength mechanism of aggregate structure considering macroscopic and mesoscopic aggregate mechanical behaviour in porous asphalt mixture. Construction and Building Materials, 300, 124262.
-Ruan, J., Dong, L., Huang, J., Huang, Z., Huang, K., Dong, H., & Qiu, R. (2017). Vacuum-gasification-condensation of waste toner to produce industrial chemicals and nanomaterials. ACS Sustainable Chemistry & Engineering, 5(6), 4923-4929.
-Sandeep, K., Singh, B., & Kathuria, A. (2026). Surface modified aggregates for enhanced moisture resistance in cold mix asphalt. Construction and Building Materials, 508, 145114.
-Shah, S. A. R., Hussan, S., Ben Kahla, N., Anwar, M. K., Baluch, M. A., & Nawaz, A. (2024). Performance evaluation and optimization of
binder-toner and mixing efficiency ratios in an
e-waste toner-modified composite mixture using response surface ethodology. Infrastructures, 9(11), 200-201.
-Shanahan, M. (1991). Adhesion and wetting: similarities and differences. Rubber World;(United States), Vol. 205.
-Showkat, B., Suresha, S. N., & Akhandappagol, N. (2020). Study of rheological and creep recovery properties of asphalt binder modified with waste toner. Journal of Materials in Civil Engineering, 32(11), 04020331.
-Siddiq, M. U., Anwar, M. K., Almansour, F. H., Javed, J., & Qurashi, M. A. (2025). Performance evaluation of waste toner and recycled
LDPE-Modified asphalt pavement: A mechanical and carbon assessment-based optimization approach towards sustainability. Sustainability, 17(15), 7003.
-Singh, D., Habal, A., Ashish, P. K., & Kataware, A. (2018). Evaluating suitability of energy efficient and anti-stripping additives for polymer and Polyphosphoric acid modified asphalt binder using surface free energy approach. Construction and Building Materials, 158, 949-960.
-Solaimanian, M., Kennedy, T. W., & Tripathi, R. (1998). Performance characteristics of asphalt binders and mixtures modified by waste toner. Transportation Research Record, 1638(1), 120-128.
-Suryawanshi, S., & Kataware, A. (2026). Investigating moisture susceptibility of lignin modified asphalt binders with natural aggregates using surface free energy analysis. Nondestructive Testing and Evaluation, 41(7), 4135-4159.
-Suryawanshi, S., & Kataware, A. (2026). Adhesion characteristics of natural aggregate or slag with water based warm mix asphalt modified binder using surface free energy method. Journal of Adhesion Science and Technology, 40(4), 766-790.
-Taha, B. A., Rasheed, S. K., Al-Saffar, Z. H., Radeef, H. R., & Dulaimi, A. (2025). Enhancing moisture resistance in hot mix asphalt: evaluating the effectiveness of amine-free anti-stripping agents. Journal of Building Pathology and Rehabilitation, 10(2), 146.
-Van Oss, C. J., Chaudhury, M. K., & Good, R. J. (1988). Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems. Chemical reviews, 88(6), 927-941.
-Wang, X. W., Ren, J. X., Gu, X. Y., Li, N., Tian, Z. Y. Chen, H. Q. (2021). Investigation of the adhesive and cohesive properties of asphalt, mastic, and mortar in porous asphalt mixtures. Construction and Building Materials, 276, 122255.
Wang, T., Liang, G., & Liu, Y. (2025). Analysis of the adhesion failure mechanism of the asphalt-aggregate interface under the action of moisture. Construction and Building Materials, 485, 141968.
-Wei, J. and Zhang, Y. (2012). Application of sessile drop method to determine surface free energy of asphalt and aggregate. Journal of Testing and Evaluation, Vol. 40, 807-813.
Wu, H., Yu, J., Song, W., Zou, J., Song, Q., & Zhou, L. (2020). A critical state-of-the-art review of durability and functionality of open-graded friction course mixtures. Construction and Building Materials, 237, 117759.
Wu, Z., Javed, J., Siddiq, M. U., Qurashi, M. A., & Lyu, P. (2026). Utilization of Waste Toner as a Sustainable Modifier in Asphalt Binder: Experimental Investigation and ANN-Based Performance Evaluation. Infrastructures, 11(6), 206-207.
Xiao, F.; Zhao, W.; Gandhi, T. and Amirkhanian, S. N. (2010) Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures, Journal of Materials in Civil Engineering, Vol. 22, 1047-1055.
-Yildirim, Y., & Kennedy, T. W. (2002). Binder designs for the toner modified asphalt demonstration projects.
-Yildirim, Y., Hazlett, D., Davio, R., on Waste, T. R. B. C., & At, T. R. M. R. C. (2004). Toner-modified asphalt demonstration projects. Resources, conservation and recycling, 42(3), 295-308.
-Yin, H., Cao, S., Guo, F., & Wu, X. (2025). Adhesion properties between rubber asphalt mastic and aggregate: Verification from surface free energy theory and molecular dynamics. Materials, 18(13), 3115.
-Zhang, M. X., Wang, Y. M., Zhang, W. K., Du, W., Li, X., Wang, X. N., & Liu, X. C. (2024). Adhesion characteristics of montmorillonite modified asphalt unveiled by surface free energy and AFM. International Journal of Adhesion and Adhesives, 132, 103699.
-Zhang, Z., Ji, J., Li, X., Shi, Z., & Wang, J. (2025). Study of interface adhesion between polyurethane and aggregate based on surface free energy theory and molecular dynamics simulation. Applied Sciences, 15(2), 606.
-Zhou, T., Wan, S., Dong, Z., Xie, S., You, L., & Jin, C. (2026). Physicochemical mechanisms of asphalt–aggregate interface adhesion: Effects of mineral composition and surface energy. Construction and Building Materials, 513, 145469.
