-Abdollahi, S. F., Jahangiri, B., Leavitt, A., & Andriescu, A. (2026). Laboratory evaluation of the rutting performance of different lanes at the pavement testing facility at asphalt binder level. Transportation Research Record.
-Anderson, D. A., Christensen, D. W., Bahia, H. U., Dongre, R., Sharma, M. G., Antle, C. E., & Button, J. (1994). Binder characterization and evaluation, volume 3: Physical characterization. Strategic Highway Research Program, National Research Council.
-Anderson, D. A., Le Hir, Y. M., Planche, J. P., Martin, D., & Shenoy, A. (2002). Zero shear viscosity of asphalt binders. Transportation Research Record, 1810(1), 54–62.
-Bahia, H. U., Hanson, D. I., Zeng, M., Zhai, H., Khatri, M. A., & Anderson, R. M. (2001). Characterization of modified asphalt binders in Superpave mix design.
-Booshehrian, A., Mogawer, W. S., & Bonaquist, R. (2013). How to construct an asphalt binder master curve and assess the degree of blending between RAP and virgin binders. Journal of Materials in Civil Engineering, 25(12), 1813–1821.
-Brasil, M. A. D. C., Leite, L. F. M., Aragão, F. T. S., Osmari, P. H., Chinelatto Júnior, L. S., Nascimento, L. A. H. D., & Araujo, J. R. D. (2024). Performance evaluation of asphalt binder modified with lignin-derived nanocarbon. Matéria (Rio de Janeiro), 29.
-Chailleux, E., Ramond, G., Such, C., & de La Roche, C. (2006). A mathematical-based master-curve construction method applied to complex modulus of bituminous materials. Road Materials and Pavement Design, 7(sup1), 75–92.
-Cross, M. M. (1965). Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems. Journal of Colloid Science, 20(5), 417–437.
doi.org/10.1016/0095-8522(65)90022-X
-D’Angelo, J., Kluttz, R., Dongre, R. N., Stephens, K., & Zanzotto, L. (2007). Revision of the Superpave high temperature binder specification: The multiple stress creep recovery test. Journal of the Association of Asphalt Paving Technologists, 76.
-Dobson, G. R., Monismith, C. L., Puzinauskas, V. P., & Busching, H. W. (1969). The dynamic mechanical properties of bitumen. Association of Asphalt Paving Technologists Proceedings.
-Dong, W., Ma, F., Fu, Z., Qin, W., Qi, C., He, J., & Li, C. (2024). Construction and examination of temperature master curve for asphalt with different aging extents. Fuel, 370.
-Ferry, J. D. (1980). Viscoelastic properties of polymers. John Wiley & Sons.
-Gao, J., Wang, H., You, Z., & Hasan, M. R. M. (2018). Research on properties of bio-asphalt binders based on time and frequency sweep test. Construction and Building Materials, 160, 786–793.
-Gholami, M., Khodadadi, M., Hajikarimi, P., & Khodaii, A. (2024). Investigating the effects of reducing the number of temperatures and frequencies on the development of master curves for viscoelastic properties of bituminous composite. Measurement, 230, 114503.
-Golalipour, A. (2011). Modification of multiple stress creep and recovery test procedure and usage in specification.
-Goodrich, J. L. (1988). Asphalt and polymer modified asphalt properties related to the performance of asphalt concrete mixes. 57.
-Hu, Y., Cheng, X., Sreeram, A., Si, W., Li, B., Pipintakos, G., & Airey, G. D. (2025). Enhancing fatigue resistance and low-temperature performance of asphalt pavements using antioxidant additives.
-Karakas, A. S. (2026). Evaluation of Aging Effects on Asphalt Binders and Pavements: Rheological Responses to Rejuvenators and Numerical Analysis of Polymer Modification. Polymers, 18(6), 759.
doi.org/10.3390/polym18060759
-Kumar, A., & Choudhary, R. (2024). A study on steady and dynamic viscosity evaluation of bio-rubberized asphalt binders. 1326(1), 012110.
-Kumar, R. (2022). Deep Neural Networks for Pavement Distress Prediction Using LCMS and Image Data. Journal of Transportation Engineering.
-Martinez-Arguelles, G., Casas, D., Peñabaena-Niebles, R., Guerrero-Bustamante, O., & Polo-Mendoza, R. (2025). A novel master curve formulation with explicitly incorporated temperature dependence for asphalt mixtures. Infrastructures, 10(9), 227.
-Mashaan, N. S., Oguntayo, D. O., & Dassanayake, C. (2025). Waste By-Products in Asphalt Concrete Pavement Construction:
A Review. Materials, 18(17), 4092. doi.org/10.3390/ma18174092
-Nouali, M., Derriche, Z., & Ghorbel, E. (2026). Effect of High-Temperature Storage on the Rheological and Non-Newtonian Behaviors of Used Engine Oil: Plastic Bag Waste Modified Bitumen. International Journal of Pavement Research and Technology, 19(6), 1586–1604. doi.org/10.1007/s42947-025-00536-1
-Parker, F., & Brown, E. R. (1990). A study of rutting of Alabama asphalt pavements. Highway Research Center, Auburn University.
-Petersen, J. C., Robertson, R. E., Branthaver, J. F., Harnsberger, P. M., Duvall, J. J., Kim, S. S., & Bahia, H. U. (1994). Binder characterization and evaluation: Vol. 1.
-Pouget, S., Sauzéat, C., Di Benedetto, H., & Olard, F. (2014). Calculation of viscous energy dissipation in asphalt pavements. The Baltic Journal of Road and Bridge Engineering, 9(2), 123–130.
-Rahi, M., Fini, E. H., Hajikarimi, P., & Nejad, F. M. (2015). Rutting characteristics of styrene-ethylene/propylene-styrene polymer modified asphalt. Journal of Materials in Civil Engineering, 27(4), 04014154.
-Sengoz, B., & Isikyakar, G. (2008). Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22(9), 1897–1905.
-Sharma, A. (2025). Chemo-rheological characterization of asphalt binders using different aging processes.
-Taheri, A., Khodaii, A., & Hajikarimi, P. (2026). Correlations among chemical and rheological aging indices of asphalt binder at high temperatures. Scientific Reports.
-Undugoda, P. M. (2024). Evaluation of rheological master curve parameters for the practical specification grading of Canadian asphalt binders.
-Wang, Y. (2020). Combining Numerical and Image Data for Pavement Performance Modeling. Journal of Infrastructure Systems.
-Wang, Z., Ding, H., Ma, X., Yang, W., & Ma, X. (2024). Predicting dynamic properties and fatigue performance of aged and regenerated asphalt. Coatings, 14(12), 1486.
-Wu, W., Jiang, W., Fu, Z., Xiao, J., Yuan, D., & Xing, C. (2024). Comparison of dynamic and steady viscosity in high-viscosity modified asphalt binder and analysis of its zero shear viscosity test methods. Journal of Materials in Civil Engineering, 36(2), 04023574.
-Yaqueen, M. N., Kuity, A., & Ahmed, M. A. (2025). Sustainable nano silica production from agricultural residues. International Journal of Pavement Research and Technology.
-Yildirim, Y., Solaimanian, M., & Kennedy, T. W. (2000). Mixing and compaction temperatures for hot mix asphalt concrete. 69, 131–170.
-Yurdakul, H., & Özdemir, A. M. (2025). Optimizing high-temperature performance of asphalt binder using aromatic thermoplastic resin. Journal of Thermoplastic Composite Materials.
-Zhan, Q., Cheng, Z., Cao, X., Liu, Q., Yuan, Y., He, L., & Gao, J. (2026). Multiscale rheological properties of pavement asphalt. Coatings, 16(3), 355.
