Evaluation of Rheological Behaviour of Bitumen Containing Industrial Waste Ashes

Document Type : Original Article

Authors

1 M.Sc., Student, Department of Civil Engineering, Malard Branch, Islamic Azad University, Malard, Tehran, Iran.

2 Department of Civil Engineering, Malard Branch, Islamic Azad University, Malard, Tehran, Iran.

3 Department of Civil Engineering, Rahman Institute of Higher Education, Ramsar,Mazandaran, Iran.

Abstract

The purpose of this paper is to investigate the effect of coal waste ash and rice husk ash on mechanical properties of the stone matrix asphalt mixtures. In this study, of coal waste ash and rice husk ashes was used as a substitute for limestone powder in percentages (0 %, 25 %, 75 %, 75 % and 100 %)in the stone matrix asphalt mixtures. also to prevent drain down of this mixture, the cellulose fibers and SBS polymer fibers were used. in order to investigate the performance characteristics of mixtures the Marshall stability test,  Resilient modulus, indirect tensile strength, moisture  sensitivity, dynamic creep, and wheel tracking tests were performed. the results showed that the replacement of rice husk ash with limestone powder has improved the performance characteristics of the mixture. While the use of coal waste ash is only enhanced the moisture sensitivity of mixtures and it has a negative effect on the performance properties of mixtures.

Keywords

References

- Ali N, Chan JS, Simms S, Bushman R, Bergan AT., (1996),  “Mechanistic Evaluation of Fly Ash Asphalt Concrete Mixtures”. J Mater Civil Eng., 8(1), pp.19–25.
-­Arabani, M., Babamohammadi, S., & Azarhoosh, A. R., (2015), “Experimental investigation of seashells used as filler in hot mix asphalt”, International Journal of Pavement Engineering, 16(6), pp.502-509.
- Arabani, M., Tahami, S. A., & Taghipoor, M. (2017), “Laboratory investigation of hot mix asphalt containing waste materials”, Road Materials and Pavement Design, 18(3),
pp.713-729.
- Arabani, M., Tahami, S. A., & Hamedi, G. H., (2018), “Performance evaluation of dry process crumb rubber-modified asphalt mixtures with nanomaterial”, Road Materials and Pavement Design, 19(5), pp.1241-1258.
- Asi, I. M., (2006), "Laboratory comparison study for the use of stone matrix asphalt in hot weather climates", Journal of Construction and Building Materials, No. 20, Issue 10, pp. 982-989.
- A.H. Lav, M.A. Lav, A.B. Goktepe, (2006), “Analysis and design of a stabilized fly ash as pavement base material, Fuel 85 (16),
pp.2359–2370.
https://doi.org/ 10.1016/j.fuel.2006.05.017.
- B. Sengoz, A., (2005), “Topal, Use of asphalt roofing shingle waste in HMA, Constr Build”, Mater 19 (5) pp.337–346.
-Çelik, (2008), “Influence of fly ash on the properties of asphalt, Pet. Sci. Technol”,
pp. 1571–1582, https://doi.org/10.1080/10916460701287474.
-Chandra, R. Choudhary, (2013), “Performance characteristics of bituminous concrete
with industrial wastes as filler”, J. Mater. Civil Eng. 11, pp.1666–1673.
- Churchill EV, Amirkhanian SN., (1999), “Coal Ash Utilization in Asphalt Concretemixtures”. J Mater Civil Eng, 11(4), pp.295–301.
- Fini, E. H., Al-Qadi, I. L., You, Z., Zada, B., & Mills-Beale, J., (2012), “Partial replacement of asphalt binder with bio-binder: characterisation and modification”, International Journal of Pavement Engineering, 13(6), pp.515-522.
-­Gómez-Meijide, B., Pérez, I., Airey, G., & Thom, N., (2015), “Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste”, Construction and Building Materials, 77, pp.168-178.
-­Huang, X. Shu, Q. Dong, J. Shen, (2010), “Laboratory evaluation of moisture susceptibility of hot-mix asphalts containing cementitious fillers, J. Mater. Civ. Eng. 22 (7), pp.667–673, https://doi.org/10.1061/(ASCE)MT.1943-5533.0000064.
- Huang, B., Shu, X., & Vukosavljevic, D., (2010), “Laboratory investigation of cracking resistance of hot-mix asphalt field mixtures containing screened reclaimed asphalt pavement”, Journal of Materials in Civil Engineering, 23(11), pp.1535-1543.
- Kandhal, P. S., (1993), “Waste materials in hot mix asphalt—An overview”, In Use of waste materials in hot-mix asphalt, ASTM International.
-­Karasahin, S., Terzi, (2007), “Use of marble waste dust in the mixture of asphalt
concrete as mineral filler, Constr. Build. Mater. 21 (3), pp.616–620.
-­Lesueur, D., (2009), “The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification”, Advances in colloid and interface science, 145
(1-2), pp.42-82.
- Liang, M., Liang, P., Fan, W., Qian, C., Xin, X., Shi, J., & Nan, G., (2015), “Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymers”, Materials & Design, 88,
pp.177-185.
-­Melotti, R., Santagata, E., Bassani, M., Salvo, M., & Rizzo, S., (2013), “A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures”, Waste management, 33(9), pp.1906-1917.
-National Cooperative Highway Research Program, (2002), “Simple Performance Test for Superpave Mix Design”, Report 465.
-­Osinubi, J.E. Edeh, (2011), “Reconstituted coal ash stabilization of reclaimed asphalt pavement, in: In Geo-Frontiers 2011 Advances in Geotechnical Engineering, 2011, pp. 1172–1181, https://doi.org/10.1061/41165(397)120.
- Rusbintardjo, G., Hainin, M. R., & Yusoff, N. I. M., (2013), “Fundamental and rheological properties of oil palm fruit ash modified bitumen” Construction and Building Materials, 49,
pp.702-711.
-­S. Serin, N. Morova, M. Saltan, S. Terzi, (2012), “Investigation of usability of steel fiberin asphalt concrete mixtures, Constr, Build, Mater, 36 pp.238–244.
-­Sharma, S. Chandra, R. Choudhary, (2010), “Characterization of fly ash bituminous concrete mixes, J. Mater. Civ. Eng. 22 (12) pp.1209–1216, https://doi.org/ 10.1061/(ASCE) MT.1943-5533.0000125.
-Sobolev, I.F. Vivian, R. Saha, N.M. Wasiuddin, N.E. Saltibus, (2014), “The effect of fly ash on the rheological properties of bituminous materials, Fuel 116, pp.471–477, https://doi.org/10.1016/j.fuel.2013.07.123.
-­Shivaprasad, F. Xiao, S. Amirkhanian, (2011), “Performance of warm-mix asphalt mixtures containing recycled coal ash and roofing shingles with moist aggregates for low-volume roads, Transp. Res. Rec. 2205  pp.48–57, https://doi.org/10.3141/2205-07.
- Sargin, M. Saltan, Yilmaz, N. Morova, S. Serin, S. Terzi, (2013), “Evaluation of rice
husk ash as filler in hot mix asphalt concrete, J. Constr. Build, Mater, 48 pp.390–397.
- Ziari, H., Babagoli, R., & Akbari, A., (2015), “Investigation of fatigue and rutting performance of hot mix asphalt mixtures prepared by bentonite-modified bitumen”, Road Materials and Pavement Design, 16(1), pp.101-118.
 
 

Files

Share

How to cite

Statistics