-AASHTO T. Standard test method for multiple stress creep recovery (MSCR), (2012), “Test of asphalt binder using a dynamic shear rheometer”, Washington, DC: American Association of State Transport and Officials.
-AASHTO TP101, (2014), “Estimating Damage Tolerance of Asphalt Binders Using the Linear Amplitude Sweep”, Recuperado el., 12.
-Aghapour, Moslem, and Rezvan Babagoli, (2020), "Effect of reclaimed asphalt pavement on performance of rubberised asphalt mixtures", Proceedings of the Institution of Civil Engineers-Construction Materials 173, No. 6,
pp.284-297.
-Ibrahim MR, Katman HY, Karim MR, Koting S, Mashaan NS., (2013), “A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen”, Adv Mater Sci Eng.
-Hassan, Ziari, Divandari Hassan, Babagoli Rezvan, and Akbari Ali., "Influence of bentonite additive on bitumen and asphalt mixture properties", World Academy of Science, Engineering and Technology 6, (2012).
-Hao, Peiwen, Ruixin Zhai, Zhenxing Zhang, and Xiaojuan Cao., "Investigation on performance of polyphosphoric acid (PPA)/SBR compound-modified asphalt mixture at high and low temperatures", Road Materials and Pavement Design 20, No. 6 (2019), pp.1376-1390.
-Lo Presti D, Airey G., (2013), “Tyre rubber-modified bitumens development: the effect of varying processing conditions”, Road Mater Pavement Des 2013; 14(4), pp.888–900.
-Wang, C. Wang, H. Bahia, (2017), “Comparison of the fatigue failure behaviour for asphalt binder using both cyclic and monotonic loading modes, Constr. Build. Mater.”, 151,
pp. 767–774.
-Yidirim Y., (2007), “Polymer modified asphalt binders”, Constr Build Mater, 21(1), pp.66–72.
-Zhang F, Yu JY., (2010), “The research for high-performance SBR compound modified asphalt. Constr Build Mater., 24(3), pp.410–8.
-Zhang, L.F. Walubita, A.N. Faruk, P. Karki, G.S. Simate, (2015), “Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance–A laboratory study, Constr. Build. Mater.”, 94, pp. 218–227.
)
