-Aflaki, S. and Tabatabaee, N., (2009), “Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran “, Construction and Building Materials, 23 (6),
pp. 2141-2150.
-Ameri, M., Mirzaiyan, D., & Amini, A., (2018), “Rutting resistance and fatigue behavior of gilsonite-modified asphalt binders”, Journal of Materials in Civil Engineering, 30(11), 04018292.
-Ameri, M., Mansourian, A., Ashani, S. S., and Yadollahi, G., (2011), “Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction”, Construction and Building Materials, 25(3), pp. 1379-1387.
-Ameri, M., Mansourian, A. and Sheikhmotevali, A. H., (2012), “Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology”, Construction and Building Materials, 36,
pp. 1001- 1007.
-Arabani, M., Babamohammadi, S., & Azarhoosh, A. R., (2015), “Experimental investigation of seashells used as filler in hot mix asphalt”, International Journal of Pavement Engineering, 16(6), pp.502-509.
-Arabani, M., Tahami, S. A., & Taghipoor, M., (2017), “Laboratory investigation of hot mix asphalt containing waste materials”, Road Materials and Pavement Design, 18(3),
pp.713-729.
-Brown ER, Cooley LA., (1999), “Designing stone matrix asphalt mixtures for rut-resistant pavements”, Transport Res Board 1999.
-Djakfar, L., Bowoputro, H., Prawiro, B. and Tarigan, N., (2015),“Performance of recycled porous hot mix asphalt with gilsonite additive”, Advances in Civil Engineering, accepted January.
-Fang CQ, Yu RE, Liu SL, Li Y., (2013), “Nanomaterial’s applied in asphalt modification: a review”, J Mater Sci Technol, 29(7),
pp.589–94.
- Fini, E. H., Al-Qadi, I. L., You, Z., Zada, B., & Mills-Beale, J., (2012), “Partial replacement of asphalt binder with bio-binder, characterization and modification, International Journal of Pavement Engineering, 13(6), pp.515-522.
-Federal Highway Administration, (2002), "User Guidelines for Waste and Byproduct Materials in Pavement Construction," Washington, D.C.
-Huang, X. Shu, Q. Dong, J. Shen, (2010), “Laboratory evaluation of moisture susceptibility of hot-mix asphalt containing cementations fillers”, J. Mater. Civ. Eng. 22 (7) pp.667–673.
- Kandhal, P. S., (1993), “Waste materials in hot mix asphalt—an overview”, In Use of waste materials in hot-mix asphalt, ASTM International.
-Khalili, M., Jadidi, K., Karakouzian, M., & Amirkhanian, S., (2019), “Rheological properties of modified crumb rubber asphalt binder and selecting the best modified binder using AHP method”, Case Studies in Construction Materials, 11, e00276.
-Lesueur, D., (2009), “The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification”, Advances in colloid and interface science, 145(1-2), pp.42-82.
-Liu, J. and Li, P., (2008), “Experimental study on Gilsonite-modified asphalt”, In Proceedings of the 2008 Airfield and Highway Pavements Conference, pp. 15-18.
-Mirzaiyan, D., Ameri, M., Amini, A., Sabouri, M., & Norouzi, A., (2019), “Evaluation of the performance and temperature susceptibility of gilsonite-and SBS-modified asphalt binders”, Construction and Building Materials, 207,
pp.679-692.
-Rusbintardjo, G., Hainin, M. R., & Yusoff, N. I. M., (2013), “Fundamental and rheological properties of oil palm fruit ash modified bitumen”,Construction and Building Materials, 49, pp.702-711.
-Ren, S., Liang, M., Fan, W., Zhang, Y., Qian, C., He, Y., & Shi, J., (2018), “Investigating the effects of SBR on the properties of gilsonite modified asphalt”, Construction and Building Materials, 190, pp.1103-1116.
-Suo, Z. and Wong, W. G., (2009), “Analysis of fatigue crack growth behavior in asphalt concrete material in wearing course“, Construction and Building Materials, 23(1),
pp. 462-468.
-Vargas MA, Vargas MA., Sanchez-Solis A., Manero O., (2013), “Asphalt/polyethylene blends: Rheological properties, microstructure and viscosity modeling, Constr Build Mater”, 45, pp.243–50.
-Wang, Y., C. Wang, H. Bahia, (2017), “Comparison of the fatigue failure behavior for asphalt binder using both cyclic and monotonic loading modes”, Constr. Build. Mater., 151, pp.767–774.
-Xie YG, Yao HR, Huang J., (2013), “Structure and properties of POE modified asphalt”, China Elastomeric 03, pp.29–34 [in Chinese].
-Yuan CH, Wang SF, Zhu YQ, Wang HB, Zhang Y., (2012), “Properties of the asphalts modified by typical recycled polyolefin”, Polym Mater Sci. Eng. 12. pp. 81– 4+9 [in Chinese].
-Zhang, J., L.F. Walubita, A.N. Faruk, P. Karki, G.S. Simate, (2015), “Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance–A laboratory study”, Constr. Build. Mater., 94,
pp. 218–227.