طباطبائی، الف. م.، (1380)، کتاب روسازی راه، مرکز نشر دانشگاهی، تهران.
- ادیبی، ن.، اصانلو، م.، رحمانپور، م.، (1391)، "بررسی اثرات زیست محیطی دامپهای باطله معادن زغالسنگ کارمزد"، اولین کنگره ملی زغالسنگ.
-AASHTO T283. (1995), "Resistance of compacted Bituminous Mixture to Moisture Induced Damage". AASHTO Standard Specifications for Transportation Materials, Part II, Washington, D.C.
-ASTM: C 618, (1982), "Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete", ASTM Book of Standards, USA.
-ASTM: D 422 – 63, (2002), "Standard Test Method for Particle-Size Analysis of Soils", ASTM Book of Standards, USA.
-ASTM: D 1559, (1998), "Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus", ASTM Book of Standards, USA.
-ASTM D4123-82, (2003) “Indirect Tension Test for Resilient Modulus of Bituminous Mixtures”, ASTM Book of Standards, Vol. 04.03, USA.
-Anderson, D. A. and Goetz, W. H. (1973). “Mechanical Behavior and Reinforcement of Mineral Filler-asphalt Mixtures” Proc. Association of Asphalt Paving Technologists, Vol. 42, pp. 37-66.
-Bardini .V, Júnior .J, Klinsky .L, (2013), " Influence of mineral filler on Volumetric properties of hot mix asphalt ", International Journal of Pavements Conference.
-Canovas CR, Olias M, Nieto JM, Sarmiento AM, Ceron JC (2007), "Hydro geochemical characteristics of the Tinto and Odiel Rivers (SW Spain)". Factors controlling metal contents. Sci Total Environ 373: pp.363–382.
-Chan, X. Ji. (1999), Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes: Cement and Concrete Composites, pp.293-300.
-EN 12697-24. (2004), "Bituminous mixtures-test methods for hot mix asphalt - part 24: resistance to fatigue. European committee for standardization".
-García, R., Fríasa, M., Sanchez de Rojas, M. I., Juan Valdés, A. and Medina, C. (2012). “Effect of activated coal mining wastes on the properties of blended cement”. Cement Concrete Comp. 34. Pp.678-683.
- Hiago F, Kim YR, Lee J. (2008), "Research on fatigue of asphalt mixtures and pavements in Nebraska". Report No. P579, University of Nebraska Lincoln.
-Huang, B. S., Dong, Q. and Burdette, E. G. (2009). “Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete”. Constr. Build. Mater. pp.3451-3456.
-Hwang, S. D., Park, H. M. and Rhee, S. K. (2008). “A study on engineering characteristics of asphalt concrete using filler with recycled waste lime”. Waste Manage. 28(1): 191-200.
-Inuthia, J. M. and Nidzam, R. M. (2009). "Effect of Slag and Siliceous Additions on the Performance of Stabilized Coal Waste Backfill". World of Coal Ash Conference (WOCA), Lexington, Kentucky.
- Katamine, N. M. (2006). "Phosphate waste in mixtures to improve their deformation". J. Trans. Eng. 126: pp.382-391.
-Kavussi .A, Moghadas .F Nejad, Modarres .A, (2011)," Laboratory fatigue models for recycled mixes with pozzolanic cement and bitumen emulsion ", Journal of Civil Engineering and Management, 17(1), pp. 98–107.
- Kavussi .A, Modarres .A, (2010). "A model for resilient modulus determination of recycled mixes with bitumen emulsion and cement from ITS testing results". Construction and Building Materials 24, pp. 2252-2259.
- Laskowski, J. S. 2001. "Coal Flotation and Fine Coal Utilization". Department of Mining and Mineral Process Engineering.
- Lee JS, Chon HT (2006), "Hydro geochemical characteristics of acid mine drainage in the vicinity of an abandoned mine", Daduk Creek, Korea. J Geochem Explore 88, pp.37–40.
- Lee ST. (2009), "Influence of recycled fine aggregates on the resistance of mortars tomagnesium sulfate attack". Waste Manage; 29(8), pp.2385–91.
- Li, X. P. (2008). "Recycling and reuse of waste concrete in China, Part I: Material behavior of recycled aggregate concrete". Resour. Conserv. Recy. 53(1): pp.36-44.
- Masashi .K, Takeshi .K, Youichi .S. (2000) "MSW fly ash stabilized with coal ash for geotechnical application". J Hazard Mater; 76: pp.265–283.
- Modarres .A, F Moghadas Nejad Kavussi .A, Hassani .A, Shabanzadeh .E, (2011), " A parametric study on the laboratory fatigue characteristics of recycled mixes", Construction and Building Materials 25, pp. 2085–2093.
- Muniandy, E. A. (2011), “The effect of type and particle size of industrial wastes filler on indirect tensile stiffness”. Aust. J. Basic Appl. Sci. 5(11): pp.297-308.
- Neville, A. M., (1993), “Properties of Concrete", Longman Scientific and Technical, Singapore
- Niazi, Y. & Jalili Q. M. (2009). "Effect of Portland Cement and Lime Additives on Properties of Cold In-Place Recycled Mixtures with Asphalt Emulsion", Construction and Building Materials 23, pp. 1338-1343.
- Prithvi S. Kandhal, (1992), "Waste Materials in hot mix asphalt - an overview, National Center for Asphalt Technology", Auburn University, Alabama.
- Roberts FL, Kandhal PS, Brown ER, Lee DY, Kennedy TW (1996), "Hot mix asphalt materials, mixture design", and construction, 2nd ed., National Asphalt Pavement Association Research and Education Foundation, Lanham, Maryland.
- Santos, C., Filho .J, Pagnussat .D, (2012). "Use of Coal Waste as Fine Aggregates in Concrete Blocks for Paving". 10th International Conference on Concrete Block Paving, Shanghai, Peoples Republic of China.
- Sargın, S., Saltan, M. and Morova, N. (2013). "Evaluation of rice husk ash as filler in hot mix asphalt concrete". Constr. Build. Mater. 48.
pp. 390-397.
- Sargin, S., Morova, N., Saltan, M. and Sung, D. H., Hee, M. P. and Suk, K. R. (2008). "A study on engineering characteristics of asphalt concrete using filler with recycled waste lime". Waste Manage. 28. pp. 191-200.
- Setiadji B.H, (2005), “Use of waste materials for pavement construction in Indonesia", Journal of the Institution of Engineer, Singapore, Vol. 45, Issue2.
- Shahhoseiny .M, Doulati .F, Ardejani, Shafaei .S.Z, Noaparast .M, Hamidi .D, (2013), "Geochemical and Mineralogical Characterization of a Pyritic Waste Pile at the Anjir Tangeh Coal Washing Plant, Zirab, Northern Iran", Mine Water Environ 32, pp.84–96.
- Taha R, Al-Rawas A, A Al-Harthy A. and A Qatan A, (2002), " Use of Cement Bypass Dust as Filler in Asphalt Concrete Mixtures", ASCE:0899-1561, pp.338-343.
- Tayfur S, Ozen H, Aksoy A. (2007), "Investigation of rutting performance of asphalt mixtures containing polymer modifiers". Construct Build Mater; 21: pp.321–8.
- Thanaya, I.N.A., J. P. Forth, (2006), "Utilisation of Coal Ashes in Hot and Cold Bituminous Mixtures", International Coal Ash Technology Conference.
- Xue, Y. J., Hou, H. B., Zhu, S. J. and Zha, J. (2009). "Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact". Constr. Build 23. pp.989-996.
- Yan .K. Xu .H, Zhang .H. (2013). "Effect of mineral filler on properties of warm asphalt mastic containing sasobit". Constr. Build. Mater. 48. pp.622-627.
- Yilmaz, M. Baha Vural Kök, Necati Kuloğlu, (2011). "Effects of using asphaltite as filler on mechanical properties of hot mix asphalt". Constr. Build. Mater. 25. pp.4279-4286.
- Zhao, W., Leeftinkb, R. B. and Rotterc, V. S. (2010). "Evaluation of the economic feasibility for the recycling of construction and demolition waste in China: The case of Chongqing". Resour. Conserv. Recy. 54(6). pp. 377-389