-نوری، ع.، مقدس نژاد، ف.، و خدایی، ع. (1393)، "دستگاه سنجش مقاومت برشی دینامیکی بین لایههای روسازی تقویت شده با ژئوسنتتیک". تهران: سازمان ثبت اسناد و املاک کشور، قوه قضاییه جمهوری اسلامی ایران.
-Ahn, H. (2012), "Pull-off Test for Evaluation of Asphalt Pavement Interface. West Lafayette, Indiana: Annual Transportation Research Board Meeting and publication in the Journal of the transportation Research Board".
-Al-Qadi, I., Qasim Hasiba, K. I. (2012), "Development of a testing approach for tack coat application rate at pavement layer interfaces".
-Bae A., M. L. (2010), "Effects of Temperature on Interface Shear Strength of Emulsified Tack Coats and Its Relationship to Rheological Properties". Journal of the Transportation Research Board, No.2180
-Baek, J. (2010), "Modeling reflective cracking development in hot mix asphalt overlays and quantification of control techniques". Urbana, Illinois: University of Illinois at Urbana-Champaign.
-Canestrari F., F. G. (2005), “Advanced Testing and Characterization of Interlayer Shear Resistance”. Journal of the Transportation Research Board, No. 1929.
-Canestrari, F., & E., S. (2005), "Temperature effects on the shear behaviour of tack coat emulsions used in flexible pavements". 6 (1).
-Chen, J. (2010), "Effect of Surface Characteristics on Bonding Properties of Bituminous Tack Coat". Journal of the Transportation Research Board,
(No. 2180).
-Collop A., T. N. (2004), "Assessment of Bond Condition Using the Leutner Shear Test". Vol. 156, (No.4).
-Collop A.C., S. M. (2009), "Shear bond strength between asphalt layers for laboratory prepared samples and field cores". pp.23.
-D’Andrea, A. T. (2014), "Interface roughness parameters and shear strength". 7 (1–10. doi:10.5539/mas.v7n10p1).
-Diakhaté, M. (2007), "Fatigue et comportement des couches d’accrochage dans les structures de chaussées".
-Diakhate, M. P. (2006), "Shear fatigue behaviour of tack coats in pavements". (7) pp.201-222.
-Donovan, E. P., & Al-Qadi, I. (2000), "Optimization of Tack Coat Application Rate for Geocomposite Membrane on Bridge Decks1740.
-Ferrotti, G. C. (2011), "A strategic laboratory approach for the performance investigation of geogrids in flexible pavements. pp.25 (5).
-Ferrotti, G. C. (2012), "Experimental evaluation of the influence of surface coating on fiberglass geogrid performance in asphalt pavements". pp.34.
-Freeman, T. J., Button, J. W., & Estakhri, C. K. (2010), "Effective prime coates for compacted pavement bases". Austin: Texas Department of Transportation.
-Gubler, R. P. (2005), "Influence of water and temperature on mechanimechanical properties of selected asphalt pavements. (38),
pp.523–532. doi:10.1617/14317.
-Jaskuła, P. (2014), "Influence of compaction effectiveness on interlayer bonding of asphalt layers". The 9th international conference “Environmental Engineering.
-Kim, H. A. (2011), "Numerical and experimental analysis for the interlayer behavior of double-layered asphalt pavement specimens. 23(1) (12–20. doi:10.1061).
-Kucharek, A. J., (2010), "Determination of Factors Affecting Shear Testing Performance of Asphalt Emulsion Tack Coats.
-Leng Z., O. H.-Q. (2008), "Interface Bonding Between Hot-Mix Asphalt and Various Portland Cement Concrete Surfaces".
No. 2057.
-Miró R., M. A. (2006), "Evaluation Of The Effect Of Heat-Adhesive Emulsions For Tack Coats With Shear Test From The Road Research Laboratory Of Barcelona". Annual Meeting of the Transportation Research Board.
-Ozer H., A.-Q. I. (2008), "Fracture-Based Friction Model for Pavement Interface Characterization", pp.2057.
-Pasquini, E. M. (2012), "Laboratory characterisation and field validation of geogrid-reinforced asphalt pavements".
pp.14 (1).
-Raab, C. (2004 a), "Interlayer shear performance :Experience with different pavement structures". Dübendorf,Switzerland: 3rd Eurasphalt & Eurobitume Congress Vienna.
-Raab, C. P. (2004 b), "Effect of tack coats on interlayer shear bond of pavements".
-Raab, C. P. (1999), "Methoden zur beurteilung des schichtenverbunds von asphaltbelagen.
-Salinas A., A.-Q. I. (2013),"Interface layer tack coat optimization. 2372, pp.53-60.
-Santagata, F. A. (2012), "Statistical investigation of two different interlayer shear test methods". 42, pp.705-714.
-Sholar, G. A. (2004), "Bond strength of bituminous tack coats (73)", pp.771-806.
-Sokolov, K. G. (2005), "Extended numerical modeling and application of the coaxial shear test for asphalt pavements". 38, pp.515–522.
-Sutanto, M. H. (2009), "Assessment of bond between asphalt layers." Nottingham: Thesis submited to the university of Nottingham for the degree of Ph.D.
-Tashman L., N. K. (2006), "Evaluation of the Influence of Tack Coat Construction Factors on the Bond Strength between Pavement Layers". USA: Report Prepared for Washington State Department of Transportation.
-Tschegg, E. K.-T. (1995), "Investigation of Bonding between Asphalt Layers on Road Construction".
-Uzan, J. L. (1978), "Investigation of Adhesion Properties between Asphaltic Concrete layers". Technical Sessions, Vol. 47.
-Vaitkus, A. D. (2012), "Research of asphalt layer bonding in Lithuanian pavement structures". Lithuania: Gradevinar.
-West, R. M. (2004), "Evaluation of Bond Strength Between Pavement Layers".
-Wheat, M. (2007), "Evaluation of bond strength at asphalt interlayers". Manhattan, Kansas: US Department of Transportation.
-Zamora-Barraza, D. C.-P.-F.-Z. (2010), "New procedure for measuring adherence between a geosynthetic material and a bituminous mixture". (28) pp.483-489.
-Zofka A., M. M. (2015), "Advanced shear tester for evaluation of asphalt concrete under constant normal stiffness conditions". (16) pp.187-210.