پژوهشنامه حمل و نقل

پژوهشنامه حمل و نقل

ارزیابی ژئوتکنیکی پایداری خاکریزهای راه در محورهشتگرد–طالقان، با تحلیل اجزای محدود سامانه ژئوگرید–ریزشمع

نوع مقاله : مقاله پژوهشی

نویسندگان
1 گروه مهندسی عمران . دانشکده مهندسی عمران و معماری ؛دانشگاه ملی مهارت تهران
2 گروه جغرافیا دانشگاه زاهدان
3 دانشکده مهندسی دانگاه SDU الماتی قزاقستان
10.22034/tri.2026.607170.3533
چکیده
خاکریزهای راه و شیروانی‌های برشی در محورهای کوهستانی در معرض اثر هم‌زمان هندسه شیب، خاک‌های ضعیف یا حساس به رطوبت، آب زیرزمینی، بار ترافیک و توالی ساخت قرار دارند. در این پژوهش، در محور هشتگرد–طالقان درباره سامانه ترکیبی ژئوگرید–ریزشمع از دیدگاه پایداری شیروانی و تغییرشکل بازتحلیل و تفسیر شده است. در این راستا تغییر شکل ها بر اساس پارامترهای مدل عددی و نتایج آزمایشگاهیبه کمک نرم افزار Plaxsis 2D تحلیل شده است. پارامترهای خاک به شناسایی زمین، نمونه‌برداری و بررسی‌های آزمایشگاهی مرتبط‌اند. مدل مورد مطالعه از فرض کرنش صفحه‌ای، رفتار الاستوپلاستیک موهر–کولمب و روش کاهش مقاومت برشی برای محاسبه ضریب اطمینان استفاده می‌کند. ضریب اطمینان استفاده شده برای این مدل برابر 1.346 و مقدار مرجع عددی برابر 1.386 است؛ اختلاف مطلق 0.040 و اختلاف نسبی محاسبه‌شده نسبت به مقدار مرجع 2.886 درصد به دست می‌آید. این انطباق، کنترل عددی اولیه مدل مرجع را پشتیبانی می‌کند، اما به‌تنهایی اعتبارسنجی میدانی عملکرد سامانه ترکیبی را اثبات نمی‌کند. روندهای مطالعاتی نشان می‌دهند که افزایش زاویه شیروانی و شیب لایه زیرین با کاهش پایداری همراه است؛ در مقابل، افزایش زاویه اصطکاک داخلی، افزایش طول ریزشمع و کاهش فاصله ردیف‌ها عموماً پاسخ پایداری را بهبود می‌دهد. در پیکربندی بررسی‌شده، اثر افزوده سختی محوری ژئوگرید در حدود ‎40 کیلونیوتن بر متر ‎ محدود استفاده شده است؛ این مقدار آستانه عمومی طراحی نیست. نتیجه‌گیری مهندسی باید علاوه بر ضریب اطمینان، نشست کل و تفاضلی، بار ترافیک، فشار آب حفره‌ای، نفوذ بارندگی، عملکرد زهکشی، ساخت مرحله‌ای، دوام ژئوگرید و رفتار گروهی سه‌بعدی ریزشمع‌ها را دربر گیرد.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Geotechnical Assessment of Road Embankment Stability along the Hashtgerd–Taleghan Corridor, Iran, Using Finite Element Analysis of a Geogrid–Micropile Reinforcement System

نویسندگان English

Hoseinali Bagi 1
Sirus Ghanbari 2
Ali Rahimi 3
1 Civil engineering department ; Faculty of Civil engineering and Architecture.Technical and vocational university
2 Department of Geography, University of Sistan and Baluchestan, Zahedan
3 Engineering faculty of SDU University , Almaty, Kazakhstan
چکیده English

Road embankments and cut slopes along mountainous transportation corridors are subjected to the combined effects of slope geometry, weak or moisture-sensitive soils, groundwater conditions, traffic loads, and construction sequences. This study reanalyzes and interprets the stability and deformation behavior of a combined geogrid–micropile reinforcement system along the Hashtgerd–Taleghan road corridor. Deformations are evaluated using numerical modeling in PLAXIS 2D, based on model parameters and laboratory test results. The soil parameters are derived from site investigations, sampling, and relevant laboratory tests. The numerical model adopts plane-strain conditions and an elastoplastic Mohr–Coulomb constitutive model, while the factor of safety is calculated using the strength reduction method. The reported factor of safety is 1.346, compared with a reference numerical value of 1.386, yielding an absolute difference of 0.040 and a relative difference of 2.886% with respect to the reference value. This agreement supports the preliminary numerical consistency of the model with the reference solution; however, it does not, by itself, establish field validation of the combined reinforcement system. The reported trends indicate that increasing the slope angle and the inclination of the underlying soil layer reduces slope stability. Conversely, increasing the internal friction angle, extending the micropile length, and decreasing the spacing between micropile rows generally improve stability. For the investigated configuration, the marginal benefit of increasing geogrid axial stiffness becomes limited beyond approximately 40 kN/m. This value should not be interpreted as a universal design threshold. Engineering assessments should consider not only the factor of safety but also total and differential settlements, traffic loading, pore-water pressure, rainfall infiltration, drainage performance, staged construction, geogrid durability, and the three-dimensional group behavior of micropiles.

کلیدواژه‌ها English

Slope stability
Geogrid
Micropile
Slope reinforcement

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 30 آبان 1405