پژوهشنامه حمل و نقل

پژوهشنامه حمل و نقل

بهینه‌سازی عملکرد مکانیکی آسفالت نیمه‌گرم با افزودنی‌های شیمیایی و نانومواد

نوع مقاله : مقاله پژوهشی

نویسندگان
1 گروه مهندسی عمران دانشگاه ملی مهارت تهران
2 گروه مهندسی عمران، دانشگاه ملی مهارت، تهران، ایران
10.22034/tri.2026.603087.3513
چکیده
کاهش دمای تولید و تراکم مخلوط‌های آسفالتی در آسفالت نیمه‌گرم (WMA) می‌تواند مصرف انرژی و انتشار آلاینده‌ها را کاهش دهد، اما ممکن است با تضعیف برهم‌کنش قیر–سنگدانه و افزایش آسیب‌پذیری در برابر رطوبت همراه باشد. در این پژوهش، اثر همزمان زایکوترم و نانوآهک بر عملکرد مکانیکی و دوام رطوبتی مخلوط آسفالت نیمه‌گرم حاوی ساسوبیت آزمایشگاهی بررسی شد. از سنگدانه آهکی معادن شهرضا و قیر با درجه نفوذ 60/70 استفاده شد. چهار نوع مخلوط شامل مخلوط شاهد، مخلوط اصلاح‌شده با زایکوترم، مخلوط حاوی نانوآهک و مخلوط ترکیبی نانوآهک–زایکوترم تهیه و مقایسه شدند. مقدار زایکوترم و نانوآهک به‌ترتیب 0.1 و 2 درصد وزنی قیر و درصد بهینه قیر حدود 5.05 درصد به دست آمد. عملکرد مخلوط‌ها بر اساس پایداری مارشال، مدول برگشت‌پذیر در دمای 25 درجه سانتی‌گراد و مقاومت در برابر آسیب رطوبتی، با استفاده از مقاومت کششی غیرمستقیم و نسبت مقاومت کششی (TSR) مطابق روش اصلاح‌شده لوتمن (AASHTO T383)، ارزیابی شد. نتایج نشان داد اثر افزودنی‌ها به شاخص عملکرد وابسته است. هر دو افزودنی زایکوترم و نانوآهک مقاومت در برابر رطوبت را بهبود دادند؛ به‌طوری‌که TSR از حدود 78 درصد در مخلوط شاهد به حدود 91 تا 94 درصد در مخلوط‌های اصلاح‌شده افزایش یافت. در میان افزودنی‌های منفرد، نانوآهک بیشترین اثر را بر افزایش مدول برگشت‌پذیر نشان داد که بیانگر نقش آن در سختی و ظرفیت باربری مخلوط است. همچنین، مخلوط ترکیبی نانوآهک–زایکوترم بالاترین پایداری مارشال را داشت و حدود 12 درصد افزایش نسبت به مخلوط شاهد نشان داد. یافته‌ها نشان می‌دهد استفاده همزمان از زایکوترم و نانوآهک می‌تواند با بهبود برهم‌کنش قیر–سنگدانه، کاهش افت مقاومت ناشی از رطوبت و ارتقای عملکرد مکانیکی، رویکردی مؤثر برای توسعه مخلوط‌های WMA با عملکرد متوازن باشد. این نتایج بر اهمیت طراحی همزمان سامانه قیر–سنگدانه–افزودنی در کنترل آسیب رطوبتی و عملکرد بلندمدت مخلوط‌های آسفالت نیمه‌گرم تأکید می‌کند.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Enhancing the Mechanical Performance of Warm-Mix Asphalt through Chemical Additives and Nanomaterials

نویسندگان English

Hoseinali Bagi 1
Ali Rahimi 2
1 Civil engineering department. Technical and vocational university
2 Engineering department, SDU University, Almaty , Kazakhstan
چکیده English

Warm-mix asphalt (WMA) technology reduces asphalt production and compaction temperatures, offering significant energy and environmental benefits. However, reduced temperatures may compromise binder–aggregate adhesion and increase moisture susceptibility. This study experimentally evaluates the effects of Zycotherm and nano-lime on the mechanical performance and moisture durability of Sasobit-modified WMA mixtures. Limestone aggregates from Shahreza, Isfahan Province, Iran, and 60/70 penetration-grade asphalt binder were used. Four mixture types were investigated: control, Zycotherm-modified, nano-lime-modified, and hybrid nano-lime–Zycotherm mixtures. Zycotherm and nano-lime were incorporated at 0.1% and 2.0% by binder weight, respectively, while the optimum binder content was approximately 5.05%.



Mixture performance was evaluated using Marshall stability, resilient modulus at 25 °C, indirect tensile strength (ITS), and tensile strength ratio (TSR) following the modified Lottman procedure (AASHTO T 383). The results demonstrated that additive effects were dependent on the performance indicator. Both Zycotherm and nano-lime substantially improved moisture resistance, increasing TSR from approximately 78% for the control mixture to 91–94% for the modified mixtures. Nano-lime provided the greatest enhancement in resilient modulus among the individual additives, indicating its beneficial effect on mixture stiffness and load-bearing capacity. In contrast, the hybrid nano-lime–Zycotherm mixture exhibited the highest Marshall stability, representing an approximately 12% improvement over the control mixture.

Overall, the results indicate that combining a silane-based adhesion promoter with nano-lime can effectively improve the mechanical performance and moisture durability of Sasobit-containing WMA mixtures. The improvements are attributed to enhanced binder–aggregate adhesion and reduced moisture-induced strength degradation. These findings highlight the potential of integrated binder–aggregate–additive modification for improving WMA performance and mitigating moisture-related deterioration.

کلیدواژه‌ها English

Warm-mix asphalt (WMA)
Moisture susceptibility
Resilient modulus
Chemical and nanomaterial modifiers

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 30 آبان 1405