نوع مقاله : مقاله پژوهشی
عنوان مقاله English
نویسندگان English
This study aimed to evaluate and compare the effect of sand type (calcareous versus siliceous) on the mechanical properties, durability, and moisture susceptibility of hot mix asphalt (HMA) with a Topeka 0-19 gradation containing river gravel. For this purpose, two hot mix asphalt mixtures were prepared with identical Topeka 0-19 gradation and river gravel coarse aggregates, in which calcareous sand was used as the fine fraction in one mixture and siliceous sand in the other. The physical properties of the aggregates, including specific gravity, water absorption, sand equivalent, and angularity, were determined, and then Marshall, indirect tensile strength (ITS), and tensile strength ratio (TSR) tests were performed on the specimens. The results showed that the hot mix asphalt containing calcareous sand had a Marshall stability of 1660 kg, while the mixture containing siliceous sand had a Marshall stability of 1250 kg. The optimum binder content was determined to be 5.0% for the calcareous mixture and 5.6% for the siliceous mixture. The tensile strength ratio was obtained as 83% for the calcareous mixture and 71% for the siliceous mixture. The water absorption of the calcareous sand was measured at 1.02%, and that of the siliceous sand at 2.59%. The calcareous sand exhibited better performance than the siliceous sand in all key parameters, including Marshall stability, moisture durability, and optimum binder content. By keeping the gravel type (river gravel) and the Topeka 0-19 gradation constant, this study demonstrates the pure effect of sand type on the properties of hot mix asphalt and fills the existing gap in domestic research regarding the direct comparison of calcareous and siliceous sand under controlled conditions.
کلیدواژهها English