-Aaron R. Coenen , M. Emin Kutay , Nima Roohi Sefidmazgi & Hussain U. Bahia (2012), “Aggregate structure characterization of asphalt mixtures using two-dimensional image analysis,” Road Materials and Pavement Design, pp. 433-454.
-A. T. Papagiannakis and E. A. Masad, (2008), “Pavement Design and Materials” The John Wiley & Sons, Inc., pp.552.
-Bruno, L. Parla, G., Celauro, C., (2012), “Image analysis for detecting aggregate gradation in asphalt mixture from planar images” Construction and Building Materials, Vol. 28, pp. 21–30.
-Hassan, N. A., Khan, R., Raaberg, J., Lo Presti, D., (2015), “Effect of mixing time on reclaimed asphalt mixtures: An investigation by means of imaging techniques” Construction and Building Materials Vol.99, pp. 54–61.
-Hu, J. Qian, Z., Liu,Y., Zhang, M., (2015), “High-temperature failure in asphalt mixtures using micro-structural investigation and image analysis” Construction and Building Materials, Vol. 84, pp. 136–145.
-Iuri S. Bessa, Veronica T.F. Castelo Branco, Jorge B. Soares(2012)“Evaluation of different digital image processing software for aggregates and hot mix asphalt characterizations,” Construction and Building Materials, Vol.37, pp. 370–378.
Keymanesh, M. R., Nasrollahtabar, A., & Shahryari, N. (2018). Internal Structure Features of Asphalt Mixture for Field Samples. Journal of Rehabilitation in Civil Engineering, 6(1), 10-20.
Kemanesh, M., Ziari, H., Nasrollahtabar, A., & Shahryari, N. (2017). Analysis of Microstructural Parameters and Indirect Tensile Strength in Evaluation of Hot Mixture Asphalt Rutting Performance.
-Kutay, M., Arambula,E., Gibson,N., Youtcheff,J.(2010) “Three-dimensional image processing methods to identify and characterize aggregates in compacted asphalt mixtures International Journal of Pavement Engineering” Vol. 11, No. 6, pp.511–528.
- Masad, E., Muhunthan, B., Shashidhar, N. Harman, T., (1995), “Application of Digital Image Processing to Quantitative Study of Asphalt Concrete Microstructure” Transportation Research Record 1492/ 1995 pp.53–60.
-Masad, E., Muhunthan, B., Shashidhar, N., Harman T., (1999), “Internal Structure Characterization of Asphalt Concrete Using Image Analysis” journal of computing in civil engineering, pp. 88–95.
-Masad, E., Kutay, M., E., (2012), “Characterization of the Internal Structure of Asphalt Mixtures,” Transportation Research Circular E-C161, pp.2-16.
- NCHRP Report 673 (2018), “A Manual for Design of Hot Mix Asphalt with Commentary”, Transportation Research Board Washington D.C.
-Qinglin Guo, Yanshan Bian, Lili Li, Yubo Jiao, Jinglin Tao, Chengxiu Xiang, (2015), “Stereological estimation of aggregate gradation using digital image of asphalt mixture” Construction and Building Materials, Vol. 94, pp. 458–466.
-Roohi Sefidmazgi.N , Tashman.L & Bahia.H,(2012) “Internal structure characterization of asphalt mixtures for rutting performance using imaging analysis,” Road Materials and Pavement Design,pp 21-37.
-Shaheen, M., Al-Mayah, A., Tighe, S., (2016), “A novel method for evaluating hot mix asphalt fatigue damage: X-ray computed tomography” Construction and Building Materials,Vol.113, pp. 121–133.
-Roohi Sefidmazgi.N (2011), “Defining Effective Aggregate Skeleton in Asphalt Mixture Using Digital Imaging,” Master of Science Civil&Environmental Engineering, University of Wisconsin-Madison.
-Vural kok, b., yilmaz, m., turhan, i., (2012), “Comparison of the Volumetric Properties and Stabilities of Field and Laboratory Compacted Asphalt Concrete” 5th Eurasphalt & Eurobitume Congress, Istanbul, 13-15th.
-Wang, H. Zhang, R. Chen, Y. You, Z. and Fang, J., (2016), “Study on microstructure of rubberized recycled hot mix asphalt based
X-ray CT technology” Construction and Building Materials, Vol. 121, pp. 177–184.
-Wang, L., (2011), “Mechanics of Asphalt Microstructure and Micromechanics” The McGraw-Hill Companies, Inc.
-Xu, H., Tan, Y., Yao, X., (2016), “X-ray computed tomography in hydraulics of asphalt mixtures:Procedure, accuracy, and application” Construction and Building Materials, Vol. 108, pp. 10–21.
- Xu Cai, Duanyi Wang, (2013), “Evaluation of rutting performance of asphalt mixture based on the granular media theory and aggregate contact characteristics” Road Materials and Pavement Design, Vol.14, No.2, pp.325-340.